Crestron CNRFGWA Wireless RF Receiver

Operations Guide - DOC. 8086A Wireless RF Receiver: CNRFGWA 1
One-way RF receiver/gateway
Crystal locked tuning for reliable reception. Two frequencies available:
433.92 MHz
418 MHz
Reception range up to 300 feet
Up to 15 wireless touchpanels and/or 240 wireless remotes can
communicate with one gateway
Wireless RF Receiver: CNRFGWA

Introduction

Functions and Features

The CNRFGWA wireless one-way radio frequency (RF) gateway/receiver (gateway)
is designed to operate in a Crestron® 2-Series or CNX control system. The gateway
is available in two versions: one operates at 433.92 MHz; the other, CNRFGWA-
418, operates at 418 MHz. Except for operating frequency, the units are functionally
identical.
The gateway receives RF signals from one or more wireless one-way touchpanels
such as the ST-1550, ST-1550C, ST-1700C, and MT-500C (418 MHz only), and
wireless remotes such as the CNWM, CNRFT-32A and 48A, and CNRFHT-15A and
30A.
The CNRFGWA gateway translates the received signals into commands for
transmission over the Crestron network (Cresnet®). Up to 15 touchpanels or 240
wireless remotes (or some combination of the two) can communicate with one
gateway. If more touchpanels or remotes are needed, more gateways (up to 252) may
be added to the system. However, when multiple gateways are used, the units must
be located at least 50 feet from each other.
Functional Summary