Crestron electronic CNXRMIRD, CNRFGWA-418, ML-600 C2N-IRGW-FIR Gateway, Flush Mount, Connections

ISYS I/O WIFI & HANDHELD REMOTES

wifi & handheld remotes

Handheld Remote Accessories

IR GATEWAYS

C2N-IRGW-FIR Gateway, Flush Mount

The C2N-IRGW-F IR Gateway is a 1-way infrared receiver for Crestron IR wireless handheld remotes and touchpanels. It is also compatible with any third-party IR remote utilizing the RC5 command set.

The C2N-IRGW-F is designed to install flush into any drywall or ceiling tile surface. Its visible face consists of a smoked plastic lens measuring 1-1/2 inch diameter. The C2N-IRGW-F is a Cresnet device compatible with any 2-Series control system.

SPECIFICATIONS

IR Wireless

IR Frequency: 36 to 38 kHz IR

Formats: Crestron format, RC5

Range: Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength

Connections

~10 inch (~25 cm) 4-wire pigtail Connects to Cresnet control network

LED Indicators

(1 red) Indicates IR signal reception, Cresnet network communication, and setup/update functions

Controls

(1) Recessed miniature pushbutton for setup

Power Requirements

Cresnet Power Usage: 1 Watt (0.04 Amps @ 24 Volts DC)

Environmental

Temperature: 41° to 104°F (5° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Cylindrical plastic, drywall or ceiling tile mountable in a 1 inch (2.54 cm) diameter round hole

Dimensions

Diameter: 1.50 in (3.81 cm)

Depth: 2.19 in (5.54 cm)

Weight

0.9 oz (25.52 g

150

www.crestron.com 800.237.2041 201.767.3400

© 2007 Specifications subject to change without notice