Crestron electronic manual Available Accessories, Crestron DM-MD8X8 8x8 DigitalMediaTM Switcher

Crestron DM-MD8X8 8x8 DigitalMediaTM Switcher

24ABG / EIG 1 – 4 (SLOT 1 – 2):

(8) sets of (1) 4-pin and (1) 3-pin 3.5mm detachable terminal blocks;

Comprises (8) DMNet ports with “EIG” power selection ports, each set associated with a corresponding DM output port on the DM output card in either DM output card slot; Each DMNet port provides power and communications for a DM device connected via DM cable;Each EIG port connects to an external power supply‡, or to the internal power source via a jumper, to power the DM device connected to the corresponding DMNet port;Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) per port when connected to external power supply‡, otherwise limited to available DMNet power (see “Power Requirements” below)

100-240V~4.0A 50/60Hz: (1) IEC Socket, main power input; Mates with removable power cord, included

G: (1) 6-32 screw, chassis ground lug

COMPUTER (front): (1) USB Type B female;

USB 1.1 computer console port (6 ft cable included)

LCD Display

Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight; Displays inputs/outputs by name, video & audio signal information, Ethernet configuration and setup menus

Controls and Indicators

SOFTKEYS: (4) pushbuttons for activation of LCD driven functions

HW-R: (1) recessed miniature pushbutton for hardware reset, reboots the switcher

ROUTE: (1) pushbutton and red LED, selects ROUTE mode to allow routing changes

VIEW: (1) pushbutton and red LED, selects VIEW mode for viewing current routes

INFO: (1) pushbutton and red LED, selects INFO mode for viewing AV and device info

MENU: (1) pushbutton, steps menu back one level

ENTER: (1) pushbutton, executes highlighted menu or value

AUDIO: (1) pushbutton & red LED, selects audio routing view

VIDEO: (1) pushbutton & red LED, selects video routing view

USB: (1) pushbutton & red LED, selects USB routing view

Quick-Adjust Knob: (1) continuous turn rotary encoder, adjusts menu parameters

IN 1 – 8: (8) pushbuttons and red LEDs, select input for routing

OUT 1 – 8: (8) pushbuttons and red LEDs, select output for routing

Power Requirements

Main Power: 4 Amps @ 100-240 Volts AC, 50/60 Hz

Available DMNet Power: 55 Watts (2.3 Amps @ 24 Volts DC) from internal power supply

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 475 BTU/Hr

Rear View of DM-MD8X8

Crestron Electronics, Inc. 15 Volvo Drive l Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 l Fax: 201.767.1903

www.crestron.com

Enclosure

Chassis: Steel, black matte powder coat finish, vented sides, fan-cooled

Faceplate: Extruded aluminum, black matte powder coat finish with polycarbonate label overlay

Mounting: Freestanding or 4U 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions

Height: 6.97 in (17.68 cm) without feet

Width: 17.28 in (43.90 cm), 19.0 in (48.26 cm) with ears

Depth: 18.50 in (47.00 cm)

Weight

20.0 lb (9.1 kg)

AVAILABLE ACCESSORIES

DMC-HD

HDMI Input Card

DMC-HD-DSP

HDMI Input Card w/DSP

DMC-VID-RCA-A

RCA Analog Video Input Card w/Analog Audio

DMC-VID-RCA-D

RCA Analog Video Input Card w/SPDIF Audio

DMC-VID4

Security Camera Input Card

DMC-CATO

Quad DM Output Card

DMC-CATO-HD

Quad DM Output Card w/HDMI

DM-CBL-NP

DigitalMediaTM Cable, Non-Plenum

DM-CBL-P

DigitalMediaTM Cable, Plenum

DM-CONN

DigitalMediaTM Cable Connector

*Future option, not currently available.

†DVI connectivity is currently enabled via HDMI input/output ports using third-party adapters; DVI/RGB input card coming soon.

‡For external DMNet power, use Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply as required.

All brand names, product names and trademarks are the property of their respective owners. ©2009 Crestron Electronics, Inc.

Specifications subject to change without notice. Doc.4774 01/09