Crestron electronic GLPX-HSW-FT Problem Solving

Power Switching Cabinet GLPX-HSW-FT CRESTRON GREEN LIGHT® EXPRESS

Problem Solving

Troubleshooting ituations. If further assistance is required, please

TROUBLE

The following table provides corrective action for possible trouble s

contact a Crestron customer service representative.

Troubleshooting

POSSIBLE CAUSE(S) CORRECTIVE ACTION

Power not delivered to

the module. If the module is powered internally, verify

that the circuit breaker connected to the

first channel on the module is on and

delivering power to the module.

If module is powered externally, verify th

the POWER port is correctly wired and

receiving power.

Module(s) does not

function.

System commissioning

not complete. Arrange for system commissioning.

Module’s LED is AC power not present on PWR

flashing. L1. Check that the branch breaker feeding L1

to function, but will draw power from the

has not tripped. Note that unit will continue

backup Cresnet power supply if available.

Unit cannot be taken out Short (contact closure)

of Override mode exists between G and OVR

terminals on any of the

OVERRIDE terminals

present at bottom of the

cabinet.

Determine the reason for the short.

Remove or remedy the short (e.g. GLS-

PLS-120/277 phase-loss sensor may not

phase-loss has been detected).

have been installed properly, or actual

888-273-7876].

You can also log onto the online help section of the Crestron website (www.crestron.com/onlinehelp

If you cannot locate specific information or have questions after reviewing this guide, please take advantage of

Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-

) to ask

user account to fully benefit from all questions about Crestron products. First-time users will need to establish a

available features.

12 • GREEN LIGHT® EXPRESS Power Switching Cabinet GLPX-HSW-FT Installation Guide – DOC. 6888B