TRANSMITTER PROGRAMMING
NOTE: All transmitters must be learned at the time of programming. This system can learn up to 4 remotes.
1.Turn key to the ON position and press program button 4 times.
2.After a short delay, the unit will flash the parking lights 4 times.
3.Press the Button #1 (Lock) on the remote you wish to program.
4.You should get 2 light flashes indicating the unit is waiting for the second code to learn. Press button #1 of a second transmitter, the unit will flash 3 times. Press the lock button on a 3rd or 4th transmitter for up to 4 total. Note: The unit will not flash the lights when learning the 4th code. Turn key off to exit programming mode.
IGN
OFF
WAIT FOR 4 FLASHES
PRESS 4X's
PANIC
IGN
OFF
LIGHTS
FLASH 2, 3, or 4 X's
PRESS LOCK BTN
9
