Crimestopper Security Products CS-2014DP-TW2 manual Vehicle Operation, Vehicle #2 Control

2-VEHICLE OPERATION

The CS-2011DP, CS-2012DP-TW1, CS-2014DP-TW2 and CS-2016DP-FM systems can be used for 2 car operation. A single remote can control two independent vehicles with identical systems installed, for example, two 2011’s or two 2016’s.

NOTE: These systems ARE NOT interchangeable. A CS-2011DP system remote CANNOT control a CS- 2012DP-TW1,CS-2014DP-TW2 or CS-2016DP-FM system and vice versa!

See diagram below on how to switch your remote(s) to vehicle #2 operation. To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the “Transmitter Programming” steps at the second vehicle and learn YOUR remote, along with vehicle #2’s existing remotes.

VEHICLE #2 CONTROL:

CS-2016DP-FM CS-2012DP-TW1 CS-2014DP-TW1

CS-2011DP & "Sidekick"

PM

START

Press & hold side button for 5 seconds. Remote will beep and "II" icon will appear in lower right LCD screen.

Press & hold side button for 5 seconds, Remote will beep twice then you have 15 seconds to control vehicle #2.

Press & hold side button for 2 seconds to change vehicles. A numeral 1 or 2 will appear in upper right corner of LCD screen.

START

CrimeStopper

Press & hold 2 seconds to control vehicle #2.

26