Sensor Adjustment | Crimestopper Security Products SP-200 instruction

WIRING: 4-PIN Shock Sensor (26 Gauge wires)

Sensor Adjustment

Adjust the main shock sensor with the small White dial. Clockwise will increase sensitivity and counter-clockwise will decrease sensitivity. Adjust Pre-Warning level with small Black dial.

GREEN LED (Pre-Warn)

RED LED (Trigger)

Adjustments	+ +

(-) TRIGGER WHITE

(-) PRE-WARN BLUE

GROUND BLACK

12 VOLTS RED

SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust for sensitivity.

6

Image 6

Crimestopper Security Products SP-200 installation instructions Wiring 4-PIN Shock Sensor 26 Gauge wires, Sensor Adjustment

Contents

SP-200 REV Table of Contents PR PRE-INSTALLATION Considerations Component Mounting Violet Wire + Positive Door Trigger WiringGreen Wire Negative Door Trigger Black Wire System Chassis Ground Brown Wire + Siren Output 3 Amp Max White Wire +12V Flashing Parking Light OutputRED Wire +12V Power Input 15 amp fuse Wiring 4-PIN Shock Sensor 26 Gauge wires Sensor Adjustment Power Door Lock Wiring Valet / Program Switch Status LEDPIN Door Lock Plug Optional Negative Trigger Doorlock Wiring Transmitter Programming = Default Setting Option Programming Passive Locks / Custom Overrride Horn Chirps / PulsesPassive Arming / Chirp Countdown IGNITION-CONTROLLED Locks Silent Arming /DISARMING Chirp Defeat Active RE-ARMINGDouble Unlock Pulse Parking Lights on with Disarm Carjack Features Lock/Unlock or Arm/Disarm with Ignition onData Port Protocol Starter Kill Diagram Ignition SwitchStarter Kill Wiring Diagram Data Port Diagram BCM