WIRING: SHOCK SENSOR
SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist you in adjusting sensitivity. The Green LED indicates the “Warn Away” level and the Red LED indicates a full alarm shock sensor violation.
Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both
4 PIN SENSOR PLUG/HARNESS (WHITE):
Black Wire: Sensor Ground
Red Wire Sensor Power
Orange Wire:
Yellow Wire:
POWER DOOR LOCK WIRING
3 PIN DOOR LOCK PLUG (Optional):
GREEN:
RED: +12V Coil Power for using relays.
BLUE:
Hint: Determine the type of locking system the vehicle has before connecting any wires. Incorrect connection could result in damage to the alarm and/or the vehicle’s locking system. Some vehicles are equipped with Class 2 DATA door locks systems which require a bypass module to control the door locks. Please refer to vehicle wiring color chart which is supplied via TechWeb (basic service) for authorized dealers.
6