-4- -5-
PROGRAMMING YOUR SMART-PART™ PROGRAMMABLE MODULE
4 step Quick-Start:
1. Set your Slow Cooker* control knob to the Highest setting.
2. Plug your slow cooker into the Smart-Part™ Module.
3. Plug the Smart-Part™ Module into the electrical outlet.
4. Select the Smart-Part™ Module settings and cook time.
CHOOSING YOUR COOK TIMES AND SETTINGS
Group “A”
3040
3100
3120
3130
3145
5065
Group “B”
3060
3140
3150
3154
3164
3355
3656
3670
3730
3735
5055
5060
5070
5445
6445
Group “C”
3745
3751
3755
3760
3780
5025
1. Working from left to right on your Smart-Part™ Module, first choose
setting C, B or A depending on your model.
Below are some examples of Rival slow cookers and which setting to use.
Look on the bottom of your unit for the model number.
CHOOSING YOUR COOK TIMES AND SETTINGS (CONT.)
If you can not find your slow cooker model on the chart above or your
unit is a brand other than Rival, set your Smart-Part™ Module to Setting
C on first use. Cooking “doneness” varies by personal preference. If you
feel your food cooks for too long or at too high a temperature on Setting
C, adjust your Smart-Part™ Module to Setting B or A on next use. Always
make sure food is fully cooked before serving.
2. Select the cook time by pressing the cook time button until it reaches
your desired time and temperature.
3. When the cook time expires, the Smart-Part™ Module will
automatically switch your slow cooker to the Keep Warm setting,
until turned off. When you are finished using the Smart-Part™
Module, press the Off button. Make sure to remove the Smart-Part™
Module from the electrical outlet when not in use.
* Slow cooker must be rated less than 400 Watts (3.3 Amps). Not for use
with slow cookers that have their own electronic or mechanical timers or
special features.
SP100.02.US.OM3 5/28/02 4:03 PM Page 4