Manuals / Crosley / Kitchen Appliance / Dishwasher

Crosley 500 Series operating instructions Grounding type wall receptacle

Models: 500 Series

1 16
Download 16 pages 23.37 Kb
Page 12
Image 12

Connecting and Disconnecting the Portable/ Convertible Dishwasher

The portable/convertible dishwasher must be connected to a faucet and electrical outlet each time it is used. Follow directions on this page to properly connect dishwasher.

Faucet Adapter Assembly

For Outside

For Inside

Threaded

Threaded

Faucet

Faucet

Use

Use Thin

Thick

and

Washer

Thin

Only

Washers

Adapter

Two Brass

(Dual

Screens

Thread)

should be

 

below the

 

rubber

 

washers

Connecting the Portable Faucet Adapter Assembly

Collar

Coupler

IMPORTANT: Make sure door is latched before moving dishwasher. The power cord, faucet coupler and hoses are located in a compartment in back of dishwasher. A special adapter must be installed on faucet before you can connect dishwasher.

1.Remove faucet adapter assembly from literature package.

2.Unscrew existing sink faucet aerator.

3.Check faucet spout to see if threads are inside or outside.

•If threads are on inside of faucet spout, use both thick and thin rubber washers.

•If threads are on outside of faucet spout, use thin rubber washer only.

•If faucet has no threads, an adapter kit with instructions for attachment to a non-threaded spout is available at most hardware stores.

4.Assemble faucet spout as shown. Make sure the two brass screens are located below the rubber washers.

Connecting the Portable/Convertible Dishwasher

1.Run water at faucet until it is hot. Turn off faucet.

2.Pull hoses out of compartment.

3.Push collar down and slip faucet connector onto faucet adapter.

4.When connector snaps into place, release collar.

5.Slowly turn on hot water all the way.

6.Plug power cord into grounded outlet.

Getting Water While Dishwasher is Running

You can get water from the faucet while the dishwasher is connected. However, avoid getting water when the dishwasher is filling or draining.

1.Press red button on coupler to get the water you want. The faucet is set on hot, adjust faucet if you want cold.

2.Be sure hot water is turned back on all the way to complete cycle.

Avoid fire hazard or electrical shock. Do not use an adapter plug, extension cord or remove grounding prong from electrical power cord.

Failure to follow this warning can cause serious injury, fire or death.

Power supply cord with 3-prong

grounding plug

Disconnecting the Portable/Convertible Dishwasher

1.When cycle has finished, turn off hot water.

2.Press red button on coupler to release water pressure being careful not to release coupler.

3.Press down on collar to release coupler.

4.Empty remaining water from coupler and return it to compartment.

5.Unplug power cord and return it to compartment.

IMPORTANT: A sink spray attachment hose can burst due to constant water pressure while in use. If your spray hose is installed on same water line as the dishwasher, we suggest you disconnect the sink spray attachment and plug the hole.

Electrical Connection for a Portable/Convertible Dishwasher

An electrical supply of 120 volts, 60 Hz, AC only, 15 amps is required. For your safety, the dishwasher must be grounded. If there is a malfunction or breakdown, grounding will reduce risk of electrical shock. This dishwasher has a power cord with a 3-prong grounding plug. It must be plugged into a mating 3-prong grounding type receptacle, installed and grounded in accordance with the National Electrical Code and any local codes and ordinances.

Grounding type wall receptacle

Do not under any circumstances cut, remove or bypass the grounding prong from this plug.

Converting to Built-In

Your portable dishwasher can be converted to a built-in (undercounter) model. A conversion kit No. 154241302 is required and is available from your local dealer or distributor. Instructions are included with the kit.

12

Page 11 Page 13
Page 12
Image 12
Crosley 500 Series operating instructions Grounding type wall receptacle
Page 11 Page 13

500 Series specifications

The Crosley 500 Series is an exemplary line of turntables that embodies the resurgence of vinyl culture. Designed for both audiophiles and casual listeners, this series blends modern technology with classic aesthetics, making it an attractive option for anyone looking to enhance their music listening experience.

One of the defining characteristics of the Crosley 500 Series is its robust build quality. The turntables are constructed with durable materials that not only ensure longevity but also provide a solid foundation for optimal sound quality. The heavy base minimizes vibrations, allowing for improved tracking and sound clarity.

At the heart of the Crosley 500 Series is its state-of-the-art audio technology. The series features precision engineered tonearms that deliver consistent performance, accurately tracing the grooves of vinyl records. This precision translates to a rich, detailed sound that captures the essence of your favorite music.

The turntables also come equipped with high-quality cartridges, which are pivotal in delivering superior sound reproduction. These cartridges are designed to enhance the frequency response, ensuring that both low and high notes are articulated clearly. This results in a listening experience that is both immersive and enjoyable.

Another significant feature of the Crosley 500 Series is its versatility. The turntable supports multiple playback speeds, typically 33 1/3, 45, and 78 RPM, making it compatible with a wide range of vinyl records. Additionally, many models in the series include Bluetooth connectivity, allowing users to stream music wirelessly from their devices, thus combining the charm of vinyl with modern convenience.

The design of the Crosley 500 Series is equally noteworthy. The classic retro aesthetic with sleek finishes and customizable options makes it a stylish addition to any home. The available color choices cater to various tastes, ensuring that there is a model to fit every décor.

Furthermore, the turntables often come with built-in speakers, providing an all-in-one solution for those who prefer a compact setup. However, for audiophiles seeking an upgraded sound experience, the line also features RCA outputs, enabling connections to external speakers or amplifiers.

In summary, the Crosley 500 Series turntables capture the essence of vinyl while incorporating modern technologies. With exceptional build quality, high-performance audio components, playback versatility, and a classic design, this series is a perfect choice for anyone looking to experience music in its most authentic form.