About Your KAMELEON 6

Easy to use unique “EL” display

By choosing the ONE FOR ALL KAMELEON 6 universal remote control you have opted for easy use. Your KAMELEON 6 features a unique, user-friendly backlit display, which ensures you have easy access to all the keys you need, whilst hiding those you don’t. Made of the strictest quality, it will provide long-term satisfaction. After replacing batteries, you will need to first press any key before the screen will light up. From then on, the display will automatically illuminate whenever the remote is picked up (touching screen and remote simultaneously). It is also possible to change the activation-mode into activation by key press. To set the ”EL” display to activation by key press, see page 3, section: ”EL” screen activation setting. Also, this product comes with a build-in light sensor which will increase the brightness in a bright environment and decrease the brightness in a dark environment.

Controls up to 6 devices

Your KAMELEON 6 is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. Your KAMELEON 6 comes with 2 IR (infra-red) wide range transmitters for maximum range and is High Frequency capable up to 450 kHz. You can choose any combination of six devices you would like to operate (see page 10 for more information).

Learning feature

The KAMELEON 6 comes equipped with the unique “learning feature”, which means that you can copy almost any function (max. ± 30) from your original (working) remote control onto your new KAMELEON 6 (See “Learning Feature” on page 13). This comes in handy, when after having setup your KAMELEON 6 you may find that some functions from your original remote are missing on your KAMELEON 6 key pad.

Macros (sequence of commands)

Your KAMELEON 6 comes with an easy-to-use Macro feature, allowing you to send several commands with the press of a single key (for example turning a few devices on or off). You can use the custom keys (A, B, C) for this feature. Once you programmed a macro on one of these keys, the sequence will be performed in every mode.

Code upgrade technology

Your ONE FOR ALL KAMELEON 6 also offers a Code upgrade technology. This technology gives you the possibility to add codes to the memory. If your device uses a particular code which is not found in the KAMELEON 6 memory (using the “Direct code set up” on page 10 or the “Search Method” on page

11)you may use the ”Code Upgrade Technology” (see page 23). Thanks to this technology your KAMELEON 6 will never become obsolete.

Batteries

Your KAMELEON 6 requires 2 AA/LR6 alkaline batteries.

1.Push the battery door upwards and lift it up to remove it.

2.Match the batteries to the (+) and (–) marks inside the battery case, then insert the batteries.

3.Replace the battery cover by pushing downwards and allowing it to click back into position.

-After re-installing the batteries, the entire ”EL” display will be lit for a duration of 6 seconds upon the first key press after which it will default to the TV mode.

Low Voltage Indicator

As soon as the batteries run out of power the KAMELEON 6 will indicate this. The IR indicator will flash 5 times whenever you press a key.

Please make sure to replace them with 2 new AA/LR6 alkaline batteries.

2

WWW.ONEFORALL.COM