Crosley Radio CR12-10 Getting Started

Radio Operation

1Remove packing materials from unit.

Note: Save all packing materials.

2Remove plastic safety cover from A/C plug.

3Remove tie from A/C cord

Unwind the AC POWER CORD (24) at the back

of the unit and connect it to a power outlet.

2 Plug A/C cord into appropriate outlet.

Note:This product may be equipped with a

polaized alternating-current line plug (a

plug having one blade wider than the

other.) This plug will fit into the power

outlet only one way. This is a safety

feature. If you are unable to insert the plug

fully into the outlet try reversing the plug,

if the plug should still fail to fit, contact

your electrician to replace your obsolete

outlet. Do not defeat the safety purpose

of the polarized plug.

3 Plug A/C cord into appropriate outlet.

Power Source

Basic Operation

4To locate your saved stations:

Select the band by pressing MODE button(10/30)

to toggle between CD Player / Radio. Press

BAND (11/32) to scroll through band selections

FM 1 through AM 2. If you have stations saved at

the FM 1 display, use button numbers 1 through

6 to find

stored channels in that section.

Press BAND

(11/32) to move to FM 2, then use

buttons 1 through 6 to scroll through the saved

channels in the FM 2 location. Repeat for each

additional band mode. You can also let the

system automatically scan through your preset

stations. To automatically scan your presets,

press the AMS button(13/44) and hold for less

than 2 seconds. When it reaches a station that

you wish to listen to, press AMS button(13/44)

again to halt the scan.

5Adjusting the Volume, Bass, Treble and

Speaker Balance:

To adjust the Volume press the round SELECT

button(16/33) located near the center of the

control console. The LCD display will show VOL.

Next press the arrow up(17) or arrow down(14)

located on the large Volume button.

Hold until the desired sound level is reached.

The level will display as 0 through 15 in the

LCD display window.

To set the BASS level press the SELECT(16/33)

repeatedly until your see BASS display on the

LCD screen. Next use the large Volume button to

increase or decrease the BASS sound. The level

range will display between -10 through +10 in the

LCD display window. Release the Vol button

when the desired level is reached.

To adjust the Treble sound, repeatedly press the

SELECT button(16/33) until TREBLE is shown in

LCD display. Treble range is also -10 through+10.

Press and hold the Vol up or Vol down button until

desired treble level is reached.

To adjust the speaker balance press the SELECT

button(16/33) repeatedly until BALANCE is

shown in the LCD display window. Then press

and hold the Vol up or Vol down until

the desired

balance is reached. Range of 0 through 10 in each

direction is shown in the display window.

6Mute:

To quickly silence the sound in either theCD or

AM/FM Radio mode, press the MUTE button

(12/37) located in the lower right of the front

control panel. You will see "Mute" display in

the LCD window if this function is activated.

Getting Started

Unpacking

1To select stations:

On the AM/FM radio push the Power button(4/47)

to turn the unit on. Next press the MODE

button(10/30) to select between CD or Radio

mode. The LCD display will show FM 1, FM2,

FM3, AM 1,or AM 2.

NOTE: The FM 1, FM 2, etc. are not different

FM bands. There are actually only two bands, FM

or AM. The numbers 1, 2,3, on FM and numbers

1,and 2 on the AM band allow you to save up to

six of your favorite stations in each selected "band".

2To select the first FM station:

Press the Band button(11/32) to select the

desired listening band. Press the Forward Skip

(9) or Back Skip (8) buttons to seek the next

available station. To manually search for stations,

Press and hold either the Forward Skip (9) or

Back Skip (8) button until the display reads

MANUAL. Then repeatedly press the Forward

Skip (9) or Back Skip (8) buttons to reach the

desired station.

NOTE: The tuner will default back to AUTO

search mode 7-10 seconds of not being used.

3Saving your station to MEMORY:

Now that you have selected a station you may

save it as one of your "Favorite Presets" so that

you can quickly return to it later if you wish. You

will notice the buttons on the left side of the

control panel are numbered 1 through 6. The

Memory function lets you save up to 6 of your

favorite stations in each "band" mode. A total of

30 stations can be stored in the memory.

If you have selected FM 1 as outlined above

and are ready to save your first station to memory,

press 1 and hold it for at least 2 seconds. You will

hear a "beep" when you press. Continue to hold

and in about 2 seconds you will hear a second

beep. This confirms that your station has been

saved. Now, if you will notice in the LCD display

you will see that you are in section FM 1, your

selected station frequency is displayed in the

center and on the right side of the LCD your first

saved selection is shown as CH 1.To add a

second preset station, use the Tune(8) or Skip(9)

button to locate the next station you want to save,

then press and hold button number 2 on the left

side of the control panel. You may add up to 6

stations in the FM 1 section. To save more stations,

repeatedly press the BAND button (11/32) to

advance to FM 2, FM 3, etc. and repeat the

above steps to locate and save more stations.

To listen to stations on the AM Radio band,

repeatedly press the BAND button (11/32) until

you see AM 1 or AM2. Then use the Tune(8) and

Skip(9) button to scroll through the AM stations.

You may also save up to 6 AM stations in each

M section. Remember you must turn off the lights

& bubble tubes to receive stations in the AM mode.

Polarized Plug