6
Using the included software and cable, the USB
connection allows you record your records onto your
computer. Follow these instructions to use the USB.
1 Insert the enclosed software CD into your
computer.
2Follow the instructions on the computer screen
to install the software. If the software does not
load automatically, browse the CD and open
the Read Me folder for further instructions.
3Connect the small end of the USB cable to the
USB JACK (15) on the back of the unit.
4 Connect the other end to a USB port on your
computer.
5On your computer, open the Record Recording
Software.
6 For instructions on operating the Record
Recording Software, browse the software CD
and open the Read Me folder.
Getting Started
Unpacking................................. 4
Power Source........................... 4
Control Locators....................... 5
Operation
General.................................... 6
USB/Recording........................ 6
General
Troubleshooting Guide............ 7
Warranty................................... 8
About This Manual
Thank you for purchasing the Crosley Keepsake
(CR249). Before operating this unit, please read this
manual thoroughly and retain it for future reference.
Instructions in this manual describe the control
functions of the CR249.
Included in this package:
·Keepsake USB Turntable
·Record Recording Software
·USB Cable
·45rpm Adapter
Welcome Table of Contents
3
Operation
Turntable Operation
1 Turn the unit on by rotating the ON/OFF-
VOLUME KNOB (7) clockwise.
2 Set the SPEED CONTROL SWITCH (4) to
to the correct speed (33 1/3,45 or 78 rpm).
3 Place the record on the turntable.
4Use the CUE LEVER (2) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it onto the record.
The record will begin to turn automatically.
5At the end of the record, the tone arm will return
to its rest.
Accessory: ADAPTER FOR 45 RPM
This adaptor allows you to play 45 RPM records.
1 Place the 45 RPM adaptor over the spindle.
2 Gently place your 45 RPM record onto the
turntable.
3 Follow the steps under turntable operation to
play your record.
USB Operation
Follow the instructions on the computer screen to install the software. If the software does not load automatically, browse the CD and
open the Read Me folder for further instructions.
For instructions on operation the Record Recording Software, browse the software CD and open the Read Me folder.