Crosley Radio CR48 Control Locators, Getting Started, Unit Controls, Power Source

Unpacking the Turntable

Carefully remove the packing materials and the protective plastic bag from the unit.

Open lid and remove black tie-wrap by untwisting and gently sliding out from under tone arm.

Remove cardboard shipper.

Control Locators

Getting Started

Unit Controls

1Adapter for 45 RPM records

2AC Power Cord

3Turntable Suspension Screw

4Cue Lever

5Arm Rest

6Hold Down Clip

7Speed Control Switch

8Tone Arm

9Red Power Light

10Tone Control

11Volume On/Off Switch

12Turntable

13Spindle

4

1	2	3		4
				5	6
				7
				8
13	12	11	10	9

1

2

3

4 Remove white protective needle cover by gently pulling towards front of unit.

5 Using you fingers, turn the Turntable Suspension Screw clockwise until it is all the way down. This allows the turntable to float on its shock absorbers.

6 Release tone arm hold down clip by gently pushing to the right. This will unlock tone arm from its arm rest. Re-lock the hold down clip when moving the unit to another location.

Power Source

1 Unwind the AC POWER CORD (35) at the back of the unit and connect it to a power outlet.

2 Plug A/C cord into appropriate outlet.

AC

Polarized Plug

3 This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature, If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact you electrician to replace your obsolete outlet. Do not defeat the purpose of the polarized plug.

5