Crown Audio specifications Cm-Sm, Accessory Shock Mount Adapter for CM-700 Microphone

CM-SM

ACCESSORY SHOCK MOUNT ADAPTER FOR CM-700 MICROPHONE

he Crown® CM-SM is a mic-stand Tadapter that isolates a CM-700

microphone from mechanical vibra- tion. It will also work with other 3/4-inch diameter mics that are similar to the CM-700 in weight and size.

Because of its elastic suspension, the shock mount reduces stand and floor thumps by at least 22 dB (A weighted). For even more shock isolation, switch in the low-cut filter on the CM-700.

A thumbwheel on the shock mount lets you clamp the mic cable. This keeps the mic oriented correctly and prevents cable noise from reaching the mic. The 5/8" - 27 thread mates with standard American mic stands and booms.

Net weight: 4.3 ounces (122.5 grams).

Included accessories: 8 replacement rubber bands, part no. 100515-1. Threaded adapter for European mic stands (3/8" - 16) and photographic stands (1/4" -20). These two threads are on opposite ends of the unique reversible adapter, part no. D 7092-6.

Fig. 1

1.500” (3.81 cm) dia

1.750” (4.45 cm)

2.540” (6.45 cm)

Fig. 2

1.Insert mic through center of shock mount.

2.Trap cable under thumbwheel.

3.250” (8.25 cm)

3. Balance mic fore/aft. Rotate mic to prevent skewing.

© 2005 Crown Audio®, Inc. Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown and Crown Audio are registered trademarks of Crown International.

5/05100897-1A

CM-SM

ACCESSORY SHOCK MOUNT ADAPTER FOR CM-700 MICROPHONE

he Crown® CM-SM is a mic-stand Tadapter that isolates a CM-700

microphone from mechanical vibra- tion. It will also work with other 3/4-inch diameter mics that are similar to the CM-700 in weight and size.

Because of its elastic suspension, the shock mount reduces stand and floor thumps by at least 22 dB (A weighted). For even more shock isolation, switch in the low-cut filter on the CM-700.

A thumbwheel on the shock mount lets you clamp the mic cable. This keeps the mic oriented correctly and prevents cable noise from reaching the mic. The 5/8" - 27 thread mates with standard American mic stands and booms.

Net weight: 4.3 ounces (122.5 grams).

Included accessories: 8 replacement rubber bands, part no. 100515-1. Threaded adapter for European mic stands (3/8" - 16) and photographic stands (1/4" -20). These two threads are on opposite ends of the unique reversible adapter, part no. D 7092-6.

Fig. 1

1.500” (3.81 cm) dia

1.750” (4.45 cm)

2.540” (6.45 cm)

Fig. 2

1.Insert mic through center of shock mount.

2.Trap cable under thumbwheel.

3.250” (8.25 cm)

3. Balance mic fore/aft. Rotate mic to prevent skewing.

© 2005 Crown Audio®, Inc. Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown and Crown Audio are registered trademarks of Crown International.

5/05100897-1A