Crown Audio DC-300A Output Power, at a rated RMS sum total harmonic distortion of 0.05% of the fundamental output voltage.

1.2 SPECIFICATIONS

1.2.1 STEREO SPECIFICATIONS

Output Power

Frequency Response

1 KHz Power

Harmonic Distortion

I.M. Distortion

(60Hz-7KHz

4:1)

Slewing Rate

Damping Factor

Output Impedance

Load Impedance

Voltage Gain

Input Sensitivity

Output Signal

155 watts per channel minimum RMS (both channels oper-

ating) into an 8 ohm load over a bandwidth of 1

Hz-20KHz

at

a rated RMS sum total harmonic distortion of 0.05% of the

fundamental output voltage.

±0.1dB

DC-20KHz

at 1 watt into 8 ohms;

±ldB

DC-100KHz.

180 watts RMS into 8 ohms, per channel, both channels operating, 0.1% total harmonic distortion.

Less than 0.001% from

20Hz-400Hz.

and increasing linearly to 0.05% at 20KHzat 155watts RMS

per channel into 8 ohms.

Less than 0.05% from 0.01 watts to 0.25 watts and less than 0.01% from 0.25 watts to

155watts

into 8 ohms, per channel.

8 volts per microsecond (slewing rate is the maximum value of the first derivative of the output

signal, or the maximum slope of the output

signal).

Greater than 750,

DC-400Hz

into 8 ohms.

Less than 7 milliohms in series with less than 3 microhenries.

Rated for 8 ohm usage; safely drives any load Including completely reactive loads.

20.6±2%

26.3±0.2dB

at maximum

gain.

1.75

volts±2%

for 155 watts into 8 ohms.

Unbalanced, dual channel.