POLAR

PATTERN

LM-300A

LM-300AL

LM-301A

SUPERCARDIOID CONDENSER DUAL GOOSENECK LECTERN MICROPHONES

he Crown® LM-300A, LM-300AL and TLM-301A are dual gooseneck micro-

phones for lecterns, pulpits or similar ap- plications. Each professional quality mic is an electret condenser type with a super- cardioid pickup pattern.

The LM-300A has a built-in electronics module with an XLR connector. It plugs directly into

a female 3-pin XLR-type panel connector. The LM-300AL is the same but with a 4-3/4-inch longer boom arm.

The LM-301A has a built-in 5/8-inch (15.88- mm)-27 threaded collar that can be screwed onto a mic stand, mic boom or an Atlas AD-12 male flange. Because of the unique design of the mounting collar, the mic cable can be rout- ed either outside or inside the mounting collar. The LM-301A comes in two parts: microphone/ cable and a cylindrical electronics housing.

Because of their supercardioid pickup pattern, these microphones reject more background noise, room reverberation, and feedback than a typical cardioid microphone.

The LM Series have a smooth, wide-range fre- quency response for natural reproduction of the singing or speaking voice. Very low frequencies are filtered out to reduce pickup of mechanically induced noise, room rumble, etc. The goose- neck adjusts silently.

Supplied with the microphone is the WS-9, a highly effective foam pop filter. Its two-stage design greatly reduces explosive breath sounds. A low-cut switch built into the electronics hous- ing further reduces breath pops and handling noise.

The microphone output is a male 3-pin XLR- type connector and is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. Superior RFI protection is also provided.

LM-301A Operating Instructions

Please refer to Fig. 3, LM-301A, to identify the parts mentioned.

1.To route the mic cable inside the mounting device: remove the TA3F connector, push the collar up onto the gooseneck and pull the cable down through the collar. Reattach TA3F.

2.To route the mic cable outside the mounting device: remove the TA3F connector, push the collar up onto the gooseneck, route the end of the cable inside the collar and slot and pull the cable up through the collar and slot. Reattach TA3F. (Continued on back)

ddLM-300A

LM-301A

Specifications

Type: Unidirectional condenser.

Element: Electret condenser.

Frequency response (typical): 80 Hz to 15,000 Hz (110 Hz to 15,000 Hz with low cut). See Fig. 1.

Polar pattern: Supercardioid. See Fig. 2.

Impedance: 150 ohms, balanced. Recommended minimum load impedance 1000 ohms.

Open-circuit sensitivity: 6 mV/Pa* (–44.5 dB re

1 V/Pa*).

Power sensitivity: –42 dB re 1 mW/Pa*.

Equivalent noise level: 28 dB SPL typical

(0 dB=.0002 dyne/cm2), A-weighted. S/N ratio: 66 dB at 94 dB SPL.

Maximum SPL: 120 dB SPL produces 3% THD.

Polarity: Positive pressure on the diaphragm pro- duces a positive voltage on pin 2 with respect to pin 3 of the output connector.

Operating voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of the output connector.

Current drain: 3.5 mA.

Cable (LM-301A only): 10' (3.05-m) 2-conductor shielded 0.1" diameter cable integral to microphone terminated with Switchcraft TA3F.

Connectors (LM-300A, LM-300AL): 3-pin male XLR type in electronics interface.

Connectors (LM-301A): Switchcraft TA3F on mic cable, TB3M and 3-pin male XLR type in electronics interface.

Safe operating temperature range: –10° to +50° C,

or +14° to +122° F.

Materials: Steel housing and gooseneck.

Finish: Black.

LM-300AL

Features

Ideal for lecterns, pulpits and conference tables

Silent operating goosenecks

Supercardioid pickup pattern reduces feedback

Slim, elegant design and natural sound

LM300A and LM300AL (longer) have built- in XLR connectors

LM-301A has threaded collar

Weight:

LM-300A:5.0 ounces (145 grams).

LM-300AL:5.5 ounces (159 grams).

LM-301A:5.5 ounces (159 grams). Dimensions: See Fig. 3 on reverse side.

Included accessories: WS-9 foam pop filter (Fig. 4).

Optional accessories: WS-5 foam windscreen, PH-1A phantom power supply (1 channel, battery or AC adaptor powered), ASA-4 mic stand adapter for LM-300A and LM-300AL.

*1 pascal = 10 microbars = 10 dynes/cm2 = 94 dB SPL.

Fig. 1

Frequency Response

Frequency in Hz

Page 1
Image 1
Crown Audio specifications DdLM-300A LM-301A, LM-300AL Features, LM-301A Operating Instructions, Specifications

LM-300A, LM-300AL, LM-LM301A specifications

Crown Audio has long been recognized as a leader in professional audio equipment, and their LM series amplifiers, particularly the LM-LM301A, LM-300AL, and LM-300A, exemplify the brand's commitment to high-performance sound solutions. These amplifiers are designed to meet the demands of live sound, installations, and professional audio applications, showcasing advanced technologies and exceptional build quality.

The LM-LM301A is a versatile two-channel amplifier known for its high output power and operational efficiency. It boasts a robust power rating, delivering clean audio across various applications, from small venues to large-scale events. Key features include a lightweight design, built-in protection circuits, and the ability to operate in multiple modes, such as stereo and bridged mono, allowing for flexible usage depending on the requirements of the sound system.

The LM-300AL offers additional functionalities with enhanced connectivity options, including balanced XLR inputs and outputs, ensuring compatibility with a wide range of audio sources and speakers. Its integrated DSP capabilities provide users with control over equalization and speaker management, allowing for tailored sound optimization. This model is particularly favored for installations that require consistent, reliable performance without compromising sound quality.

For those seeking a powerhouse for their audio setup, the LM-300A is the go-to choice. This amplifier is engineered with a high-efficiency Class D design that not only conserves energy but also minimizes heat generation, making it ideal for prolonged usage in demanding environments. The LM-300A delivers exceptionally low distortion and a wide dynamic range, ensuring that every note and vocal nuance is reproduced accurately.

All three models come equipped with a comprehensive set of protection features, including short circuit, over-temperature, and over-current safeguards, ensuring longevity and reliability in diverse operating conditions. Their rugged construction and user-friendly interfaces make these amplifiers suitable for both seasoned audio professionals and newcomers alike.

In summary, Crown Audio's LM-LM301A, LM-300AL, and LM-300A amplifiers stand out for their performance, versatility, and durability, making them excellent choices for anyone in search of high-quality audio amplification solutions that can handle a variety of settings and conditions.