SST-SBSC3632T, Speciﬁcations | Crown Audio SST-SBSC 3632T

SST-SBSC 3632T

he Crown SST-SBSC 3632T is a custom Tthree-channel crossover network with CD-

horn equalization and summed low- frequency output speciﬁcally designed for use with JBL model 3632T ScreenArray® cinema speaker systems installed in cinemas, studio production and post-production environments.

SST (System Solution Topologies) modules install into the back of Crown SST-compatible ampliﬁers, saving rack space and simplifying system wiring.

For more details about the Crown SST-SBSC 3632T, contact Crown Technical Support

at 800-342-6939 or 574-294-8200. Also, visit the Crown Audio website at www.crownaudio.com.

Speciﬁcations

Performance

Frequency Response: See graph.

Signal to Noise (A-Weighted): Better than 85 dB below rated power.

Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced.

Output Impedance: 600 ohms balanced.

Total Harmonic Distortion (THD): 1 kHz rated power, less than 0.1% THD.

Crosstalk: > 50 dB from 20 Hz to 20 kHz.

Maximum Output: +18 dB into 600 ohms.

Connectors

Input: Neutrik® Combo jacks.

Output: Removable balanced terminal block.

S Y S T E M S O L U T I O N T O P O L O G I E S

Features

	• High-quality crossover and CD-horn EQ	• SST modules install into the back of your ampli-
	module designed speciﬁcally for use with JBL	ﬁer, saving rack space and simplifying system
	model 3632T ScreenArray® cinema speaker	wiring
	systems	• Neutrik® Combo jacks for balanced input con-
	• High-frequency (HF) signals are internally	nection
	routed to the Channel 2 ampliﬁer input, and	• Removable terminal block jacks for balanced
	mid-frequency (MF) signals are routed to the	• Removable terminal block jacks for balanced
	mid-frequency (MF) signals are routed to the	output to other components
	Channel 1 ampliﬁer input	output to other components
	Channel 1 ampliﬁer input	• SST Modules add ﬂexibility by allowing you to
	• Low-frequency (LF) signals are routed from	• SST Modules add ﬂexibility by allowing you to
	• Low-frequency (LF) signals are routed from	tailor your Crown Contractor (CH/CL) Series or
	Output B to an external ampliﬁer	tailor your Crown Contractor (CH/CL) Series or
	Output B to an external ampliﬁer	CE Series ampliﬁer to your application
		CE Series ampliﬁer to your application

System Block Diagram

DETAIL SHOWING NO CENTER GROUND CONNECTION

Frequency Response

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown ampliﬁer product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown ampliﬁer product is warranted to meet or exceed original speciﬁcations for the ﬁrst three years of ownership. During this time, if your unit fails, or does not perform to original speciﬁcations, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and those caused by intentional abuse. And the coverage is transferable, should you sell your unit.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributor for warranty information or call 574-294-8200.

Crown International 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 TEL: 574-294-8200 FAX: 574-294-8FAX www.crownaudio.com

Speciﬁcations subject to change without prior notice. Latest information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown International. Other trademarks are the property of their respective owners. Printed in U.S.A.

7/05

132289-5B

Crown Audio SST-SBSC 3632T specifications SST-SBSC3632T, Speciﬁcations, Features, Performance

Models: SST-SBSC 3632T