he Crown® VCA-MC4A and VCA-MC8 are Toptional level-control modules for the
Crown CTs multichannel power amplifiers. The VCA-MC4A is for the CTs 4200, and the VCA-MC8 is for the CTs 8200.
AVCA-MC module provides independent remote level control for each channel. 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifier chassis. Thus, the 4-channel CTs 4200 uses two con- nectors; the 8-channel CTs 8200 uses four connectors.
Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already fac- tory-installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center. Contact Crown Technical Support for more details.
Also available are optional wall-mount level control panels for use the the VCA module: the 1-VCAP and 4-VCAP.
The 1-VCAP is a single-gang panel providing remote volume control for one or more CTs amplifier channels. The potentiometer on the panel is wired directly to one of the VCA con- nectors on the VCA-MC.
The 4-VCAP is a two-gang panel providing remote volume control for four or more CTs amplifier channels. Each potentiometer on the panel is wired directly to the respective VCA connector on the VCA-MC.
For more details about the Crown VCA-MC4A and VCA-MC8, contact Crown Technical Sup- port at 800-342-6939 or 574-294-8200. Also, visit the Crown Audio website at www.crown- audio.com.
VCA-MC8 is shown. VCA-MC4 is similar
but with two barrier connectors.
Features
•Independent remote level control for each channel
•4-pin removable Phoenix-style barrier connectors pro- vide the +10VDC control voltage, ground, and control lines for two amplifier channels
•Optional wall-mount level control panels for use with VCA modules: 1-VCAP and 4-VCAP