Crown Boiler BB100H, BB100C manual Three Bimini Buddy Models, Hydraulic Separator, Inside View

Models: BB100C BB100I BB100H

1 2
Download 2 pages 42.2 Kb
Page 1
Image 1
Inside View
Inside View

BIMINI BUDDY

HYDRAULIC SEPARATOR

Designed to be installed with any wall-mounted Bimini boiler.
Introducing the New Bimini Buddy

The Bimini Buddy, designed to be installed with any wall-mounted Bimini Boiler, includes all near boiler piping needed for good hydraulic separation and air elimination in a compact, factory assembled package. In addition, some models include provisions for domestic hot water production.

The BB100I and BB100C models utilize the circulator that comes with the Bimini boiler so a separate DHW circulator isn’t required. They also include a three way zone valve for domestic hot water priority that is wired directly to the Bimini without the use of any additional controls.

All Bimini Buddies have an attractive jacket and convenient connections for the boiler system, air vent and expansion tank.

The Bimini Buddy has reversible piping so that it can be piped either right or left of the boiler (factory piping is for installation on right side of boiler.)

Three Bimini Buddy Models

BB100H - For heat only applications.

BB100I - For connection of a Bimini boiler to a heating system and an indirect water heater like the Mega-Stor.

BB100C - Combi unit with a plate heat exchanger and flow switch for domestic hot water production in tight places.

Page 1
Image 1
Crown Boiler BB100H manual Three Bimini Buddy Models, Hydraulic Separator, Introducing the New Bimini Buddy, Inside View