![BlueCore5™](/images/new-backgrounds/14134/141341x1.webp)
BlueCore5™
BlueTunes2 Stereo Headset
Quick Start Guide
Additional Information
Using the Analogue-Audio Adaptor board
The Analogue Audio Adaptor solution from CSR makes it easy to design and manufacture Bluetooth adaptor products for mobile handsets, MP3 players and
Connecting to wireless speakers or headphones
Screw the supplied helicoil antenna clockwise onto the base. The first time the audio adaptor is turned on it will automatically start searching for Bluetooth headphones, speakers or other A2DP sinks in range. When it finds one, it will try to pair with the device using a fixed PIN code stored in Flash memory (as shipped, the PIN code is 8888). If the pairing process is successful, it will set up an A2DP connection and start streaming music.
Pressing the button on the development board will delete any pairing information and start the adaptor looking for further suitable A2DP sources. Make sure the A2DP sink device is in pairing mode, otherwise it will not be visible.
LED patterns
The LED flashing indicates the state of the audio adaptor board:
Idle: the blue LED flashes; 100ms on, 1000ms off.
Discovering: both red and blue LEDs flash.
Streaming: the blue LED flashes; 1000ms on, 1000ms off.
Using the Voice Dongle
The Voice Dongle 1 is a true
Connecting the Voice Dongle to your headphones
1.Insert the dongle into a USB socket on your PC.
2.Ensure that the headset is in pairing mode, as described on page 2 of this document.
3.Press and hold the button (clear plastic window) on the dongle until the LEDs flash with a
Pressing and releasing the button on the dongle causes the dongle to attempt pairing with the
CSR plc
Cambridge Science Park Milton Road Cambridge CB4 0WH Tel: +44 (0)1223 692000 Fax: +44 (0)1223 692001
© CSR plc 2006 | Page 4 |
BlueCore5™
BlueTunes2 Stereo Headset
Quick Start Guide
This Quick Start Guide is designed to help you set up your BlueTunes2 Stereo Headset Evaluation Kit. For more information please visit the BlueTunes2 section at www.csrsupport.com (1)
Please check and identify the following components. Email sales@csr.com if any components are missing. You will need these components to set up your BlueTunes2 Stereo Headset Development Kit.(2,3)
1
1 Pair of Stereo
Headphones
1 CSR Nanosira Multimedia
Dongle
1
Notes:
(1)The evaluation kit is supplied with development firmware which is not suitable for production. Qualified firmware is expected in early 2007 and will be available for download from www.csrsupport.com on release.
(2)The following additional components are also supplied: 2
(3)CVC software requires a security key for continued operation. If the audio mutes after 5 minutes, please contact your CSR sales channel to obtain a valid CVC security key.
© CSR plc 2006 | Page 1 |