Section 3
Assembly Instructions
F
B
D
Carton Contents
F - Engine Assembly
1 - Hose Clamp with Screw (2)
2 - Flexible Tube
3 - Base Tube
4 - Middle Tube
5 - Bent Tube / Nozzle
1
2
3
4
5
AC
E
Assembling the Blower
Unpacking
Your unit was carefully packed at the factory to prevent damage during shipment. Unpack the carton carefully:
1.Remove all contents from the carton.
2.Identify parts and check them with the list of parts in the above Carton Contents section.
3.Examine parts for damage.
4.Immediately notify your dealer if a part is missing or damaged.
Tube Assembly
1.Place a hose clamp on each end of the flexible tube (A).
2.Connect the flexible tube (A) to the fan’s outlet tube (B).
3.Slide the grooved end of the base tube (C) into the open end of the flexible tube and securely tighten the screws on the clamps.
NOTE: The base tube is designed to swivel. This allows you to direct air flow. To avoid the tube slipping out, the base, middle and bent tubes must be tightly and perfectly inserted up to each stopper.
4.Install the middle tube (D) into the base tube, and install the bent tube / nozzle (E) into the middle tube.
5.Adjust the shoulder strap to fit your body comfortably.
8
