blade bolts are tight before restarting the engine.

13.Never leave the mower unattended without: turning off the blade clutch switch; placing the left and right steering levers in the neutral opened-out position; moving the throttle to slow; setting the parking brake; shutting off the engine and taking the key from the ignition switch.

14.Never walk or stand on the discharge side of a mower with the engine running. Turn off the blade clutch switch if another person approaches while you are operating the mower.

15.Never attempt to operate the traction unit without the mowing deck attached.

16.Keep the mower and especially the engine and hydraulic components clean and free of grease, grass and leaves to reduce the chance of fire and to permit proper cooling.

E.Operator Protection System

1.This machine is equipped with a Roll Over Protective Structure (ROPS) and seat belt.

2.The ROPS and seat belt are integral parts of this machine and should not be tampered with, modified in any manner, or removed.

3.The seat belt must be fastened securely at all times when an operator is on the machine.

4.The ROPS extends above and behind the operator position, and therefore the operator must be aware of potential contact of the ROPS with items such as trees, buildings, doorways, clothes lines, utility wires, etc., that could cause the machine to upset or roll- over....use caution in (or avoid) areas where the ROPS could come in contact with any structures, trees, etc.

5.The ROPS and seat belt add additional mass that elevates the machine’s Center of Gravity (C.G.) which negatively affects the machine’s stability and traction....use extra caution when operating on slopes.

6.Inspect the ROPS and seat belt assemblies on a regular basis for damage and improper operation....replace all components that are damaged or are not functioning properly with authorized replacement parts.

7.Failure to use the seatbelt properly could result in serious injury or death if an acciden- tal overturn occurs. In order for the ROPS to be effective, the seat belt must be securely fastened around the operator at all times when the operator is on the machine. Contact with the ROPS during an overturn could cause serious injury or death.

8.The ROPS will not prevent the machine from upsets or roll overs.

9.Only approved attachments should be used on this machine.

6

Page 6
Image 6
Cub Cadet Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment Operator Protection System