Cub Cadet SC2450 warranty Sc2450 Specifications, Sc2450 Attachment Specifications

Sc2450

multi-purpose sub-compact tractor

Sc2450 Specifications

Powertrain

Sc2450 Attachment Specifications

CL100 CURVED BOOM LOADER

Gross HP PTO HP (Hyd) Rated RPM Number of cylinders Bore and stroke Total displacement Ignition type Lubrication

Oil filter Cooling system Air cleaner Preheat system Alternator Exhaust

24 HP* diesel

16.5at 3,200 RPM 3,200 RPM

3

72 x 74 mm

55.1cu. in.

Indirect injection

Full pressure

Spin-on/full flow

Liquid cooled 4" single dry Glow plug 40 amp.

Right side pointing down

Maximum lift height at pivot point Dump clearance

Reach at maximum height Maximum dump angle Reach w/bucket on ground Maximum rollback angle Digging depth

Overall height in carry position Length of attachment (bucket bottom) Maximum lift height under bucket Bucket width/weight

Bucket capacity

Lift capacity 500 mm forward of the pivot pins, maximum height

71"

54"

27"

45°

40"

25°

4"

37"

19.25"

66"

48"/125 lbs.

5 cu. ft.

550 lbs.

CAPACITIES

Fuel tank	5.8 gal.
Cooling system	3.4 qt.
Engine oil	2.5 qt.
Transmission case	2.0 gal.

Drivetrain

Lift capacity at pivot pins, maximum height Breakout force at bucket pins

Breakout force at 500 mm forward of the pivot pins

Raising time to full height w/o load Lowering time w/o load (power down) Attachment rollback time

700lbs. 1,350 lbs.

1050 lbs.

3.5 sec.

2.5 sec.

2 sec.

Transmission type Number of ranges 4WD operations Cruise control

Hydrostatic

2 Shift-On-The-Go®

2WD & 4WD selectable

Selectable

Attachment dumping time Rated flow

Relief valve

1.5 sec.

3.5 GPM

1,813 PSI

Rear differential lock PTO type

Mid PTO/RPM (standard) Rear PTO/RPM (standard) Brake

MAXIMUM TRAVELing SPEED

Foot pedal operation

Independent

2,100/3,338

540/3,111

Wet disc

CURVED BOOM BACKHOE

Maximum digging depth	76.5"
Digging depth (2' flat bottom)	74.5"
Swing arc	150°
Loading height (bucket at 60°)	60"
Reach from swing pivot	104"
Transport height	66"

Forward low	6.0 mph
Forward high	9.3 mph
Reverse low	3.6 mph
Reverse high	5.6 mph

Hydraulics

Bucket rotation	180°
Loading reach	33"
Transport overhang	37"
Undercut	17"
Stabilizer spread (down)	74"

Type

Pump Steering/SCV/backhoe/3-pt hitch Transmission/hydraulic PTO Maximum pump capacity 3-point hitch**

3-point lift capacity at 24" behind Hydraulic control system

Dimensions

Open center

Gear/Trochoid

3.5GPM at 3,200 RPM

3.4GPM at 3,200 RPM

6.9GPM at 3,200 RPM Limited Category 1

661 lbs.

Position control

Bucket cylinder digging force	2,036 lbs.
Dipperstick cylinder digging force	1,187 lbs.
Weight (less bucket)	620 lbs.
Operating pressure	1,857 PSI
Ramp angle (w/industrial tires)	20.5°
Street pads	Optional
Bucket options	8", 12"
Residential/Commercial
Warranty†

Wheelbase	55.1"
Width	44.5"
Overall length w/	172.5"
loader and backhoe
Ground clearance	7.5" (w/R4)
Weight w/ROPS & fluids	2,525 lbs.
Tire Size
Front industrial/turf	18" x 8.5" – 10"
Rear industrial/turf	26" x 12.0" – 12"
Residential/Commercial
Warranty†
Tractor	2-year or 2,000-hour limited warranty
Engine/drivetrain	5-year or 2,500-hour limited warranty

773-04214  Printed in U.S.A. 12/10 © 2011 Cub Cadet Yanmar

Attachments 1-year limited warranty

*as rated by engine manufacturer ** 3-point hitch is optional

† See your local Cub Cadet Yanmar Independent Dealer for warranty details.

This brochure is for advertisement purposes only. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating the machine, read, understand and follow all instructions in the manual and on the machine. Specifications and programs are subject to change without notice. Images may not reflect dealer inventory and/or unit specifications. Please visit cubcadetyanmar.com for more information.