Cuisinart CMT-400PC manual Cleaning and Maintenance, Reheat Function, Bagel Function

Reheat Function

The reheat feature allows you to reheat bread without browning or toasting.

1.Insert slice(s) of bread.

Be sure that multiple slices do not overlap and the carriage is in the up position.

2.Press the carriage control lever until it locks into position.

3.Turn shade dial to reheat setting.

To stop cycle:

When the reheat cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply lift carriage lever to interrupt.

Bagel Function

The bagel feature adds extra time to the toasting cycle to allow for thicker breads.

1.Insert slice(s) of bread.

Be sure that multiple slices do not overlap and the carriage is in the up position.

2.Press the carriage control lever until it locks into position.

3.Turn shade dial to bagel setting.

To stop cycle:

When the bagel cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply lift the carriage lever to interrupt.

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.

1.Always unplug the toaster from the electrical outlet.

2.Do not use abrasive cleansers. Simply wipe the exterior with a clean damp cloth and dry thoroughly. Apply any cleansing agent to a cloth, not to the toaster, before cleaning.

3.To remove crumbs, slide out the crumb tray and discard crumbs. Wipe clean and replace. Never operate the toaster ` without the crumb tray in place.

4.To remove any pieces of bread remaining in the toaster, turn the toaster upside down and gently shake. Never insert any hard or sharp instruments into the slot, as this could damage the toaster and cause a safety hazard.

5.Never wrap the cord around the outside of the toaster. Use the cord storage cleats on the underside of the toaster.

5