Cuisinart CPT-122 manual Cleaning And Maintenance

Models: CPT-122

1 8
Download 8 pages 14.3 Kb
Page 5
Image 5
CLEANING AND MAINTENANCE

3.Press the Defrost button. LED indicates feature is activated.

To stop cycle

When the defrost cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the Cancel button to interrupt.

After use, unplug the toaster from the electrical outlet.

Reheat button

The reheat feature allows you to reheat bread without browning or toasting it.

1.Insert slice(s) of bread.

2.Press the Reheat button. LED indicates feature is activated.

Bagel button

The bagel feature adds extra time to the toasting cycle to allow for thick- er breads.

1.Insert slice(s) of bread or halved bagels.

Be sure that multiple slices do not overlap and the carriage is in the up position.

2.Press the carriage control lever until it locks into position.

3.Press the “Bagel” button to start Red LED indicates feature is activated.

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.

1.Always unplug the toaster from the electrical outlet before cleaning.

2.Do not use abrasive cleansers. Simply wipe the exterior with a clean damp cloth and dry thoroughly. Apply any cleansing agent to a cloth, not to the toaster, before cleaning.

3.To remove crumbs, slide out the crumb tray and discard crumbs. Wipe clean and replace. Never operate the toaster without the crumb tray in place.

4.To remove any pieces of bread remaining in the toaster, turn the toaster upside down and gently shake. Never insert any hard or sharp instruments into the slot, as this could damage the toaster and cause a safety hazard.

5.Never wrap the cord around the outside of the toaster. Use the cord storage cleats on the underside of the toaster.

6.Any other servicing should be performed by an authorized service representative.

5

Page 5
Image 5
Cuisinart CPT-122 manual Cleaning And Maintenance