
BEFORE FIRST use
We recommend flushing out your coffeemaker before first use.
Fill the reservoir with cold water and follow the directions for Brewing Coffee. Do not add coffee!
Once the system flush is complete, your coffeemaker is ready to brew so you can enjoy Cuisinart at its best!
PROGRAMMING YOUR COFFEEmAKER
TO BREW COFFEE
1.Turn the Function knob to Brew.
2.Press the On/Off button and release. The red On indicator light will illuminate and brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Press the On/Off button and release.
Note: To program the coffeemaker to shut off automatically, see To Program the Variable Auto Off instructions at right.
PROGRAMMING
YOUR COFFEEMAKER
FOR DELAYED BREW TIME
To Set the Time
1.Turn the function knob to Clock.
a.Set Hour: Press and hold the Hour button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off.
NOTE: When the number count passes 12, the PM light will be displayed on the LCD.
b. Set Minutes: Press and hold the Minute button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time,
turn the Function knob to any other setting or simply wait until the numbers stop blinking.
To Program the Auto On (brew start time)
1.Turn the Function knob to Prog.
2.Set the time you want coffee to begin brewing by using the Minute and Hour
3.Turn the Function knob to Auto On. LCD will display the current time.
4.Press the On/Off button and release. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red indicator will come on as well, indicating that the brew cycle is starting. Both lights will go off when Keep Warm cycle ends.
NOTE: To reactivate the Auto On feature to start brew cycle at the same time another day, simply press the On/Off button and release. The green Auto On light will illuminate.
To Program the Variable Auto Off
1.Turn the Function knob to Auto Off. Press and hold the Hour button for 2 seconds. The clock display will start blinking.
2.Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the Hour and Minute buttons (see To Set the Time).
1–4 Cup Setting
The
To use: When making a smaller amount, press the
Power Loss
the unit is unplugged, or the power fails. It holds all programmed information, including time of day, auto on time and auto off time.
7