PROGRAMMING YOUR COFFEEMAKER
Setting the Clock
When the coffeemaker is plugged in, 12:00 will appear until you set the time.
Turn the Function knob to CLOCK
Hold down the Hour or Minute button until the clock begins flashing. Press either button to select the desired time. Hold buttons down to scroll through the digits, or press and release to advance one digit at a time. When scrolling, the numbers will advance slowly and then speed up. When the number displayed approaches the desired time, press and release to advance one digit at a time. Be sure the PM indicator is on if a PM time is desired.
SETTING THE AUTO ON TIME
When you turn the Function Knob to PROG, it displays a previously selected
1. Turn the Function knob to PROG Follow directions under SETTING THE CLOCK (above) to program your start- brew time.
2. Turn the Function knob to AUTO ON LCD will display the current time.
3.Press and release ON/OFF button
A green light indicates that coffeemaker is in AUTO ON mode. A red light will come on when brew cycle begins. Both lights will go off when Keep Warm cycle ends.
NOTE: To start brew time at the same time the next day, simply make sure the function knob is on AUTO OF and press and release ON/OFF button once more. Green AUTO ON light will go on.
BEFORE BREWING YOUR FIRST POT OF COFFEE
During the manufacturing process, dust can get trapped in your coffeemaker. We recommend flushing out the system before brewing your first pot of coffee. Simply fill the reservoir and power on the unit. (See steps #2 and #6 in MAKING COFFEE instructions, below). DO NOT
ADD COFFEE!
Once you’ve done that, brew a pot of real coffee and get ready to enjoy Cuisinart at its best!
MAKING COFFEE
Follow instructions in “Before Brewing Your First Pot of Coffee” above.
1.Insert charcoal water filter
Follow directions for the preparation and insertion of the filter on page 8.
2.Fill the water reservoir
Open the reservoir cover by lifting it up. Pour in the desired amount of water using the water level window located at the side of the coffemaker.
3.Set preferences
a.Push the
b.Press Regular or Bold button to select flavor strength. Flavor will remain at selected strength until you change it.
c.Turn Ready Tone on to signal when brew cycle is complete. (5 tones will sound)
4.Add the ground coffee
Remove the filter basket by grasping the handle and lifting straight up, and then place it on the countertop. Insert a #4 paper filter or permanent filter. Be sure that the paper filter is completely open and fully inserted in the basket. It may help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup. Adjust the amount according to taste.
NOTE: The maximum capacity for ground coffee is 15 tablespoons for this coffeemaker. Exceeding this amount may cause overflow if the coffee is too finely ground.
