2.Fill the water reservoir
Open the reservoir cover by pressing the button on top cover. Pour in the desired amount of water using the water level indicator located at the side of the coffeemaker.
3.Add the ground coffee
Press button on top cover to access the brew basket. Insert a #4 paper filter OR permanent filter. Be sure that the paper fil- ter is completely open and fully inserted in the basket. It may help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup. Adjust the amount according to taste.
NOTE: The maximum capacity for ground coffee is 15 tablespoons for this coffeemaker. Exceeding this amount may cause overflow if the coffee is too finely ground.
4.Before brewing coffee
Make sure the glass carafe is in position on the heating plate and the top cover is closed. Plug the cord into an electrical outlet.
5.Set preferences
a.Press the
The digital display will show the
b. Press the Regular/Bold button to select flavor setting. The digital display will show the flavor setting for 30 seconds.
NOTE: Preferences can also be set after pressing the Brew/Off button.
Press the Brew/Off button once. The digital display will show the latest
To change
*Features will remain at selected settings until you change them.
6.Power unit
Once preferences are set, coffeemaker will begin brewing within 5 seconds after last button is pressed.
7.After brewing
When the brewing cycle has been completed, five beeps will sound. Coffee will continue to stream from the filter for several seconds.
Once the coffee has finished brewing, stir it before serving to blend the flavors. The coffee at the bottom of the carafe will be somewhat stronger than the coffee at the top.
Note: Reservoir cover may be hot during and directly after brewing. Wait at least 10 minutes before opening.
8
