Cuisinart DK-17 manual Special Cord SET Instructions

SPECIAL CORD SET INSTRUCTIONS

A short power-supply cord is provided

to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

Longer extension cords are available and may be used if care is exercised in their use.

If a long extension cord is used, the marked

electrical rating of the

extension cord must be at least as great as the electrical rating of the appliance. The extension cord should be a grounding-type

3-wire cord, and the longer cord should be arranged so that it will not drape over the

countertop or tabletop where it can be pulled on by children or tripped over.

For your protection, this unit is equipped with

a3-conductor cord set that has a molded

3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure A.

If a grounding-type outlet is not available, an adapter, shown in Figure B, may be obtained so that a 2-slot wall outlet can be used with

a3-prong plug. As shown in Figure C, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.

NOTE: Do not remove the grounding prong.

CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.

Note: Use of an adapter is not permitted in Canada.

TABLE OF CONTENTS
Important Safeguards	2
Special Cord Set Instructions	3
Unpacking Instructions	3
Brief History of Tea	4
The Health Benefit of Tea	4
Features and Benefits	4
Operation	5
Helpful Hints	5
Cleaning and Maintenance	5
Decalcification	5
Warranty	6

UNPACKING

INSTRUCTIONS

1.Place the box on a large, sturdy, flat surface.

2.Remove the instruction book and any other literature.

3.Remove the kettle lid from the box and remove the polybag.

4.Remove the upper insert.

5.Lift the kettle from the box and remove the polybag.

6.Remove the lower insert.

7.Lift the power base from the box and remove the polybag.

We suggest you save all packing materials in the event that future shipping of the machine is needed. Keep all plastic bags away from children.

3