Cuisinart GC-15 manual Using the kebab feature, Using the hot dog feature

4.Carefully slide out the drip cup by pressing down on the tab, and gently pull out the cup to dispose of its contents (see figure H). Clean cup and replace in base. (See Cleaning and Care, page 6.)

5.Thoroughly clean grill/griddle plate. (See Cleaning and Care.)

6.Flip the plate over, and return to base.

7.Make sure that drip hole in plate lines up over drip cup (see figure I).

8.Reconnect the plug into a standard electrical outlet.

Using the kebab feature

1.	Assemble the unit with the grill/griddle
	plate, kebab drawer, and drip cup in their
	proper positions. Note: Grill/griddle plate
	must be on unit when using kebab feature.
	Please keep in mind that it is very hot when
	the unit is operating.
2.	Turn the temperature control dial to desired
	temperature and preheat for approximately
	8 to 10 minutes.
3.	Prepare food according to your favorite
	kebab recipe and slide pieces onto

H.

I.

J.

K.

5.Press the kebab control switch to ON. The switch light will illuminate to let you know kebabs are rotating.

6.To check to see if kebabs are cooked,

press the kebab control switch to stop skewers from turning and remove a kebab with a potholder. If more time is needed replace the skewer and press the kebab control switch to resume cooking.

Using the hot dog feature

1.Assemble the unit with the grill/griddle plate, kebab drawer, and drip cup in proper positions. Note: The grill/griddle plate must be on unit when using hot dog feature. Please keep in mind that it is very hot when the unit is operating.

2.Turn the temperature control dial to desired temperature and preheat for approximately 8 to 10 minutes.

3.Assemble the hot dog rollers by slipping the kebab skewers through the holes in each end of the hot dog roller caps (See figure M).

4.Pull drawer to open. Position skewers with

hot dog rollers in the skewer slots so the

star-like shape at the end of each handleM. is inserted into a gear slot in the front end

of the kebab drawer. (See figures N and O).

skewers. (See figure J).

4. Pull drawer to open. Position skewers in the

skewer slots so the star-like shape at the

end of each handle is inserted into a gear

slot in the front end of the kebab drawer.

Close drawer securely. (See figures K and L).

Note: If using large cubes of meat or

seafood, you may be limited to the number

of kebabs you can cook at once.

L.

5.Using tongs, position the hot dogs in between two of the hot dog rollers. Five hot dogs will fit six hot dog rollers. Close drawer securely.

N.

O.

5