Quick Reference PROGRAMMING Guide
1. To set the Time: Press and hold the Hour or Minute button until the clock begins flashing. Hold down the Hour or Minute button to quickly scroll through the numbers. When desired time approaches, release the button and press repeatedly to advance one digit at a time. To finish, wait for the numbers to stop flashing.
Keeping it Clean
Permanent filter, filter basket, filter basket cover, carafe and lid.
Wash in warm soapy water and rinse thoroughly or clean in the upper rack of the dishwasher. Dry all parts afterevery use.
Hopper Cleaning Methods:
2. To program the
complete, press the Program button again. The green indicator light will come on to remind you that the programming function is in use.
4. To start the brew cycle at the same time on another day, simply press the Program button and release. The green
3. At the programmed time, the red On/Off indicator light will come on, indicating that the brew cycle is starting.
5. To program the
from 0 to 4 hours. To exit, do nothing for 5 seconds. Note:
Remove hopper lid, turn hopper release knob to unlocked position to remove hopper. Set aside unused coffee beans.
Wash hopper and lid with warm, soapy water, rinse thoroughly. Or place hopper and lid on upper rack of dishwasher.
NOTE: Dry all parts thoroughly. Do not add water to unit once the hopper is removed as water
can damage the grinder motor.
Remove any excess ground coffee from the grinder area before placing hopper and lid back on.