IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
1.
2.
When using electrical appliances, basic safety precau- tions should always be followed including the following:
1. | READ ALL INSTRUCTIONS. |
2. | To protect against risk of electrical shock, do not |
| immerse cord, plug or can opener in water or |
| other liquid. |
3. | Close supervision is necessary when any |
| appliance is used by or near children. |
4. | Unplug from outlet when not in use, before putting |
| on or taking off parts, and before cleaning. |
5. | Avoid contacting moving parts. |
6. | Do not operate any appliance with a damaged cord |
| or plug, or after the appliance malfunctions, or is |
| dropped or damaged in any manner. |
7. | The use of attachments not recommended or sold |
| by Cuisinart may cause fire, electrical shock, or risk |
| of injury. |
NOTICE
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
INTRODUCTION
Congratulations! You now have a can opener you’ll be proud to display on your kitchen counter. This very contemporary Cuisinart® Can Opener is constructed of sturdy stainless steel, with smooth lines and an
OPERATING INSTRUCTIONS
3.3.
4.
8. | Do not use outdoors. |
9. | Do not let cord hang over edge of table or counter, |
| or touch hot surfaces. |
10. | Do not open pressured (aerosol type) cans. |
11. | Do not open cans of flammable liquids such as |
| lighter fluid. |
12. | Do not use can opener for other than intended use. |
13. | Do not leave unattended while in use. |
14. | This appliance is intended for household use only |
| and not for commercial or industrial use. |
15. | Caution: Do not immerse in water. |
FOR HOUSEHOLD
USE ONLY
1.Plug cord into outlet.
2.Raise can opener lever.
3.Position the can under the guiding posts and lower the lever, making sure the Power CutTM blade is positioned inside the rim of the can.
4.Once the Power CutTM blade pierces the can, cutting begins. There is no need to hold the lever down during cutting.
5.Cutting action will automatically stop, once can is completely open.
6.Can will remain in position until lever is lifted.
7.To remove can, hold can firmly with one hand while lifting lever with the other.
8.Carefully remove lid from magnet.
1
2 |
3 |
4
6.
5.
1.Power CutTM Blade Assembly
2.Can Opener Lever
3.Guiding Posts
4.Can Stop
5.Base
6.Cord Storage (not shown)