Cuno SQC Series manual

SQC Series

Owner's Manual

This Manual is for the Installation, Operation,

and Maintenance of the

WATER FACTORY SYSTEMS®

SQC Series

Reverse Osmosis (RO) Drinking Water Appliance

Contents

Page VOID Make sure to flush it thoroughly as directed before the first use Page A. DETERMINE THE APPLIANCE LOCATIONS B. PREPARE THE AREA FOR INSTALLATION C.PREPARE THE APPLIANCE FOR INSTALLATION D. MAKE THE FAUCET MOUNTING HOLE E. MOUNT THE FAUCET F.INSTALL THE FEED WATER TAPPING VALVE AND TUBING G. PREFILL AND SANITIZE THE STORAGE TANK MOUNT HERE NEVER H. INSTALL THE DRAIN CONNECTION I.INSTALL THE PURIFICATION ASSEMBLY AND STORAGE TANK J. MAKE THE TUBING CONNECTIONS K. INSTALL THE ICEMAKER HOOKUP (optional) L. START UP THE APPLIANCE ‘Push-In’ Tubing Connector N. CLEAN UP AND PAPERWORK Faucet without Air Gap O. APPENDIX FOR BASEMENT INSTALLATIONS P. INSTALLATION TROUBLESHOOTING A.IMPORTANT WATER QUALITY ASSURANCE REQUIREMENTS B. REPLACING THE FILTER CARTRIDGES C. REPLACING THE RO MEMBRANE CARTRIDGE D. SANITIZING THE RO APPLIANCE E. LONG TERM NON-USE Eyedropper with Bleach Cartridge Ear Prefilter CUNO Incorporated