5
POWER SOURCES
This CD player requires either two (2) "AA" batteries (not included)
or the AC adapter (not included).
BATTERY INSTALLATION
The low battery indicator will light in the dis-
play when batteries are low (when using
battery power).
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V, 60Hz AC only. Plug the small
end into the DC 4.5V jack on the side of the unit and connect the
other end into the AC outlet. The batteries are automatically dis-
connected when the AC adapter is used.
DC 4.5V, 600 mA
Follow these precautions when using batteries in this device:
1.
2.
3.
4.
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
old batteries with fresh ones.
If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
Open the battery compartment door on
the bottom of the unit by sliding it out
and then lifting it. To prevent the pos-
sibility of losing the cover, it cannot
be removed.
Insert two (2) "AA" batteries (not included) according to the
polarity diagram inside the battery compartment. Alkaline bat-
teries are recommended for the longest playing time.
1.
2.
BATTERY PRECAUTIONS