Curtis DVD5036 BASIC OPERATION

POWER

BASIC OPERATION

Before plugging the power cord into the AC outlet, check to make sure all of the connections

have been properly completed. When they have been, carefully plug power cord into outlet.

Press the POWER button on the front panel to power the unit. The display panel will light.

When the unit is initially powered, a brief surge of electricity may cause interference with other

electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different

circuit.

Selecting Sound Source

1. Press any function button (DVD, AM/FM,

AUX1, AUX2) to select the desired sound source.

The appropriate symbol will appear in the display.

2. When the AM/FM tuner button is pressed,

the last station listened to will play.

Note: The desired program source will not play

unless it and the selected signal button coincide

with the active program source signal input.

Volume Control

The volume may be adjusted by either turning

the large volume knob on the front panel or

using the appropriate volume button on the

remote control.

Mute

Pressing the MUTE button temporarily mutes

every speaker. To resume audio, press MUTE

button again.

Memory Playback

This unit allows the viewer to stop playback,

then later continue playback from that exact disc

location. Press the STOP key to halt playback.

The unit then will memorize the location where

playback was stopped. To resume watching,

press the RESUME or PLAY key and the unit will

resume playback from the exact location where

playback was stopped. (Exclude Mp3 DISC)

When you play DVD discs, press MENU or

TITLE key return menu and title, the unit then

will memorize the location, To resume watching

press the RESUME key and the unit will resume

playback from the exact location.