Curtis LCDVD152 manual service department if no effect occur after performed inspection

Failure analysis

For abnormal condition occurring during operation, please perform inspection according to following condition, and contact after-sale service department if abnormal condition has not be eliminated yet.

	Check if power supply is connected well
	Check if power switch is turned on
No raster
	Check if the machine is in state of standby
	Check if signal source output is normal under current playing state
	Turn off main power supply and start up machine two minutes later
	Check if direction, position, and connection of antenna is temperate
	Check if signal is disturbing under current playing state
	Check if disturbance is sent out from electric application around the
D i s t u r b a n c e	machine (please adjust position of antenna to decrease disturbance to lower
with image and	degree)
accompanying	Check if power voltage of the machine and signal source are steady
sound
	Check if grounding of signal line is in good condition
	Check if there is a certain building that maybe reflect broadcast wave in environment of your family
	(Please adopt high-direction, high-sensitivity antenna to improve picture quality)
No image and	Check if power line is connected well
	Check if switch of main power supply or key of standby is opened
accompanying
sound	Check if signal source output is normal under current playing state
	Check if setting of brightness of picture, contrast and volume are set correctly
No accompanying	Check if accompanying sound input is normal
sound, but image	Check volume setting
is normal
	Check mute setting
Remote controller	Che ck contact, polarity of battery deposited in remot e controller or replace batteries
	Check if there is a barrier between emitter window of remote control and receiver
failure	window of the machine
	Clean emitter window of remote control and receiver window of the machine
No color with image	Check color setting
	Check if signal source output is normal under current playing state
Note:	service department if no effect occur after performed inspection
Please contact after-sale

abovementioned. Do not open rear cover of machine without authorization.

141