English

34

English

LOCATION OF CONTROLS

1.Mains Lead , Speaker Sockets and FM Antenna wire ( at the rear of the unit )

2.CD Tray

3.RECORD Key

4.PLAY Key

5.REWIND Key

6.FAST FORWARD Key

7.STOP / EJECT Key

8.PAUSE Key

9.CASSETTE Compartment A

10.RADIO Band wave selector

11.FUNCTION Selector (Phono/Tuner/Tape/CD)

12.PHONES Socket

13.HIGH SPEED DUBBING/ FM Stereo Selector

14.PRESET EQUALIZER Button

15.CD REPEAT Button

16.STANDBY Button

17.STANDBY Indicator

18.DIAL Pointer

19.LCD Display

20.EQ Indicators

21.REMOTE Sensor

22.Mute Indicator

23.STEREO Indicator

24.Turntable (PHONO)

25.CD Skip/Search Forward Button CD Skip/Search Backward Button

26.TUNING Knob

27.PROGRAM Button

28.BALANCE (L/R) button

29.CD STOP Button

30.VOLUME Up/Down Button

31.CD PLAY/PAUSE Button

32.CASSETTE Compartment B

33.PLAY Key

34.REWIND Key

35.FAST FORWARD Key

36.STOP / EJECT Key

37.PAUSE Key

38.CD OPEN / CLOSE Button

39.CD DIRECT Access - 1, 2, 3

CONNECTING TO POWER

Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.

For your own safety read the following instructions carefully before attempting to connect this unit to the mains.

MAINS (AC) OPERATION

This unit is designed to operate on AC 120V ~ 60Hz current only. Connecting it to other power sources may damage the unit.

CAUTION

To prevent electric shock disconnect from the mains before removing cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

POWER SUPPLY

Remove the stereo carefully from the box, retaining the packaging for future use.

AC POWER OPERATION

Connect the plug to a mains power inlet 120V AC ~ 60 Hz.

CONNECTIONS

SPEAKER CONNECTION

Connect each speaker to the corresponding speaker terminals on the back of the system. Ensure that the left speaker is connected to the left connector, and the right speaker to the right connector.

HEADPHONE

This unit will accept stereo headphones (not included) with a 3.5mm plug and an impedance of 8 ohms or greater.

The speakers are automatically disconnected when headphones are connected to the

PHONES JACKS .

Page 3
Image 3
Curtis RCD926 important safety instructions Location of Controls, Connecting to Power, Power Supply, Connections, Headphone