Curtis RLED3218A manual This RCA TV is compatible with a 200mm x 100mm mounting hole pattern

Models: RLED3218A

1 23
Download 23 pages 63.5 Kb
Page 9
Image 9
-This RCA TV is compatible with a 200mm x 100mm mounting hole pattern.

Introduction

3. Instruction for Wall Mount

The wall mount kit (not included) with your purchase allows you to mount your RCA TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. RCA is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.

Dimensions for Mounting Hole Pattern

200mm

100mm

-This RCA TV is compatible with a 200mm x 100mm mounting hole pattern.

-4 pcs of type M6 screws are required for installing the wall mount bracket to your RCA TV. Do not use screws that are longer than 10 mm. Screws that are too long may cause damage to the inside of the TV set.

-Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. RCA is not liable for these kinds of incidents

-Do not mount your RCA TV at more than a 15 degree tilt.

-Always use two people to mount the TV to a wall.

-Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

7

Page 9
Image 9
Curtis RLED3218A manual This RCA TV is compatible with a 200mm x 100mm mounting hole pattern