2.1 Battery Installation
Slide down the Battery Cover and insert two new AA alkaline batteries. Align with correct polarity of battery terminals. Close Battery Cover.
2.2 Use SD card
Insert the SD memory card into the SD card slot. Push it down until the card stays latched. Do not force – check card’s position according to the position
mark on the camera.
Push and release inserted card if you wish to remove or replace the card.
Turn your camcorder OFF before inserting / removing the SD Card.
-Note that the SD Card has a tiny LOCK switch on the side. Set the switch to
2.3Power on/off
In 
) to power ON the camera. In 
) to power OFF the camera.
In
7
