CyberData 010845 2.2 Installation

4Installing and Using the 4-Port PoweredUSB Hub Installation

Figure 2-1. Component identification: external front and back views

Port power	+12V PoweredUSB Ports	+24V
(Pwr) and Hub		PoweredUSB Port
power LEDs

Link and
Port1		Standard USB 2.0 Hi-Speed
	Serial Ports
Status		Type A Ports

LEDs

●In GREEN Mode, when 12V power applied with no host plugged in - Hub Power LED (Blue) is on, the 4 port Power LEDs and the Host Link (connection) LED DO NOT light.

●Connect a standard USB 2.0 cable from host PC to Host connector on back of hub with 12V power connected and all four top Port Power LEDs light and turn on green sequentially and the host (connection) Link LED connector turns on green.

●When a peripheral is plugged into the enumerated hub; into one of the hub ports; and the peripheral enumerates in the OS, the Status Led for that Port will light and turn green

+24V up to 2.5 Amp load	USB Host Connector Type B		On a peripheral load error on any
		●
			port, the Status LED turns orange
			and 12V power to the upper portion
			of the connector is turned off until
			the hub is restarted.

+24V up to

6.5 Amp load

Strain

Relief

Figure 2-2. Product Compatibility

The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is compatible with the following operating systems and USB standards.

Operating systems	USB
Windows 2000 and XP	2.0 Standard
LINUX	PoweredUSB 0.8g
Mac OS-X

2.2 Installation

The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is a tabletop unit with mounting feet that sit on a flat surface.

CyberData Corporation 930105A Operations Guide