12Installing the VoIP Loudspeaker Amplifier Loudspeaker Amplifier Setup

2.2.5 Confirm the IP Address, Test the Audio, and Check the Volume

When the loudspeaker amplifier is operational and linked to the network, use the Reset Test Function Management (RTFM) switch (Figure 2-10) on the loudspeaker amplifier face to announce and confirm the loudspeaker amplifier’s IP Address, test that the audio is working, and check the volume.

Figure 2-10. RTFM Switch

RTFM switch

To announce a loudspeaker amplifier’s current IP address:

1.Press and hold the RTFM switch until it beeps (after one second).

2.Release the switch to hear the IP address announcement, and check the loudspeaker amplifier volume.

Caution

Equipment Caution: Pressing and holding the RTFM switch for longer than 20 seconds will restore the loudspeaker amplifier to the factory default settings. See Section 2.6, "Restore the Factory Default Settings".

CyberData Corporation

930111F

VoIP Loudspeaker Amplifier Operations Guide