Installing the VoIP Ceiling Speaker 15

 

Configure the Speaker Parameters

 

Table 2-6. Speaker Setup Parameters (continued)

 

 

 

Web Page Item

Description

 

 

 

 

RTFM Announcementa

Enable/Disable the speaker tone (beep) and audio

 

associated with the RTFM switch.

 

 

 

 

Click on this button to save your configuration settings.

 

 

 

 

Click on this button to do an audio test. Generates a voice

 

message for testing the speaker audio quality and volume.

 

 

 

 

Link to the Network Setup page.

 

 

 

 

Link to the SIP Setup page.

 

 

 

 

Link to the MGROUPS Setup page.

 

 

 

 

Link to the Upgrade Firmware page.

 

 

 

 

Link to the Home page.

a.If you select No for RTFM Announcement, you will not hear a beep or associated RTFM audio. However, the return to default settings function remains active. If you wish to return to default settings, hold the RTFM button at least 20 seconds, then release the button.

3.After changing the parameters, click Save Settings.

2.3.4Configure the SIP Parameters

1.Click SIP Setup to open the SIP Setup page (Figure 2-9).

Note For specific server configurations, go to the following URL:

http://www.cyberdata.net/support/voip/ceilingspeaker.html

Note If the speaker is set up for MGROUPS, the SIP settings will be grayed out.

Operations Guide

930095H

CyberData Corporation