Remote-Controlled Silent Arm/Disarm

Use remote-controlled silent arm/disarm to temporarily turn off

the arm or disarm chirps by briefly pressing before either arming or disarming. The confirmation chirp(s) will then be eliminated for that one operation only. To permanently turn off the arm and disarm chirps, contact your installation dealer.

NOTE: The warn-away response to lighter impacts is bypassed if the system is armed using remote-controlled silent arm/disarm. This ensures that the siren does not chirp in an environment where you do not want chirps to be emitted. The system is still capable of being triggered by heavier impacts; only the warn-away response generated by light impacts is bypassed.

Valet Mode

Valet Mode prevents your security system from arming and triggering either automatically or with the remote transmitter. In Valet Mode, the system will not arm, but all convenience functions (door locks, trunk release, etc.) remain operational. This feature is useful when washing or servicing your vehicle. You can access Valet Mode either manually or from the remote transmitter.

To enter or exit Valet Mode with the Valet switch:

1.Turn the ignition on.

2.Turn the ignition off.

3.Press and release the Valet switch within 10 seconds.

DRW-35

The LED system status indicator

will light solidly if you are

© 2004 Directed Electronics, Inc.

9