CyberPower PR1000LCDRTXL2Ua Lcd Status And Setup Fuctions, Cyberpower Greenpower Ups Technology

LCD STATUS AND SETUP FUCTIONS

CYBERPOWER GREENPOWER UPS™ TECHNOLOGY

1.General Mode:

a. Press the “Display” button to check the status of the UPS. b. Press and hold the Display toggle for 4 seconds,

-If the machine is in the Battery Mode, it enters the status of Mute.

-If the machine is in the Line Mode, it proceeds Self Test.

c. If the Display toggle remains untouched for over 30 seconds, the LCD backlight will turn off automatically.

2.Set-up Mode

Step 1: The machine enters Set-Up Mode after holding the Display toggle for 10 seconds. Icon 3,4,5,6,7,8 lights to indicate Set-Up Mode.

Step 2: By pressing the Display toggle, users can switch between setup functions. User configurable functions are as follows:

	Item	Unit
1	Input Voltage	V
2	Output Voltage	V
3	Output Frequency	Hz
4	Load	Kw
5	Estimate Run Time	Min
6	Load Capacity	%
7	Battery Capacity	%
8	Centigrade	℃
9	Fahrenheit	℉

GreenPower UPS™

The CyberPower GreenPower UPS™ cuts UPS energy costs by up to 75% compared to the conventional UPS circuits. Conventional UPS systems pass power through a transformer to provide normal output voltage to protected devices. By contrast, the GreenPower UPS™ circuitry bypasses the transformer when utility power is normal, significantly increasing the power efficiency of the UPS. As a result, a GreenPower UPS™ produces less heat and uses less energy reducing energy costs.

When utility power is abnormal, the GreenPower UPS™ operates like a normal UPS. Since utility power operates normally 88% of the time, the GreenPower UPS™ operates primarily in its cost-cutting bypass mode.

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARNTEE

Read the following terms and conditions carefully before using the CyberPower PR1000LCDRTXL2Ua/PR1500LCDRTXL2U/ PR2200LCDRTXL2U (the "Product"). By using the Product you consent to be bound by and become a party to the terms and conditions of this Limited Warranty and Connected Equipment Guarantee (together referred to as this "Warranty"). If you do not agree to the terms and conditions

a.Sensitivity: Set the level of tolerance for UPS. Increase the UPS compatibility for local utility power condition.

High: The UPS will turn to battery power more often to provide the steady power supply to the connected equipment.

Low: The UPS will tolerate more fluctuations and turn to battery power less often.

b.Battery Pack Numbers: This function provides the estimated UPS runtime using various numbers of battery packs. The default setting is 0.

c.Battery Lifetime: Show the batteries already used time. Reset the logger when battery module replacement or first time installation.

d.Firmware Version: Show the UPS version number.

The settable items are sorted by unit as in the following table：
		Items	Unit
Step 3: Press and hold the toggle for 4 seconds. When the icons blink, the value	1	Sensitivity
of each item can be changed by slightly pressing the toggle.	2	Battery Pack Numbers	A
Step 4: To save the value and return to general mode, press and hold the toggle	3	Battery Lifetime	Year
for 4 seconds.	4	Firmware Version

Note: If the machine is left idle for over 30 seconds during setup, it will turn off the backlight and return to general mode automatically.

Note: If user wants to return to general mode without saving changes, there are two methods:

1.Wait for the backlight to turn off

2.Press and hold the “Display” toggle for 10 seconds

TROUBLE SHOOTIMG

Problem	Possible Cause	Solution
	Circuit breaker has tripped	Turn the UPS off and unplug at least one piece of equipment.
		Wait 10 seconds, reset the circuit breaker by depressing		the
	due to an overload.
		button, and then turn the UPS on.
Outlet do not provide power	Batteries are discharged	Recharge the unit for at least 4 hours
	Unit has been damaged by a	Contact CyberPower Systems about replacement batteries		at
to equipment
	surge or spike.	tech@cpsww.com
	Uncritical outlets have
	turned off automatically	Push the toggle button to make the uncritical outlets turn on.
	due to an overload
The UPS does not perform	Battery not fully charged.	Recharge the battery by leaving the UPS plugged in.
expected runtime.	Battery is degraded	Contact CyberPower Systems about replacement	batteries	at
		tech@cpsww.com
	The on/off switch is designed	Turn the UPS off. Wait 10 seconds and then turn the
	to prevent damage by rapidly
		UPS on.
	turning it off and on.
The UPS will not turn on.	The unit is not connected to	The unit must be connected to a 110/120V outlet.
	an AC outlet.
	The battery is worn out.	Contact CyberPower Systems about replacement	batteries	at
		tech@cpsww.com
	Mechanical problem.	Contact CyberPower Systems at tech@cpsww.com
	The serial cable or USB cable	Connect the cable to the UPS unit. You must use the cable that
	is not connected.	came with the unit.
	The cable is connected to the	Try another port of your computer
PowerPanel® Personal	wrong port.
		Shutdown your computer and turn the UPS off. Wait 10 seconds
Edition is inactive	The unit is not providing
		and turn the UPS back on. This should reset
	battery power.
		the unit.
	The serial cable is not the	You must use the cable included with the unit for the
	cable that was provided
		software
	with the unit.
Additional troubleshooting information can be found at www.cyberpowersystems.com/support.htm

TECHNICAL SPECIFICATIONS

Model	PR1000LCDRTXL2Ua		PR1500LCDRTXL2U	PR2200LCDRTXL2U
Capacity(VA)	1000		1500	2150
Capacity(Watts)	1000		1500	2150
Input
Input Plug Type	NEMA 5-15P			NEMA 5-20P
Input Voltage Range			80Vac-150Vac
Input Frequency Range			50/60Hz+/-3Hz(auto sensing)
Output
On Battery Output Voltage			Pure Sine Wave at 120Vac+/-5%
On Battery Output Frequency			50/60Hz+/-1%
Transfer Time(Typical)			4 ms
Overload Protection	On Utility: Circuit Breaker, On Battery: Internal Current Limiting
Surge Protection and Filtering
Lightning/Surge Protection			Yes
Internet Ready(DSL/Phone/			RJ11/RJ45(One In/One Out)
FAX/Modem Protection)
Physical
Output Receptacles	(8)NEMA 5-15R			(8) NEMA 5-15/20R
Dimensions(in)			2U Rack, 17.1’’ x 19.7’’ x 3.5’’
Weight (lb)	59		67	75
Battery
Battery Model	RB1290X4G		RB1290X4F
Extension Runtime			Yes
Hot Swappable External Battery			Yes
Warning Diagnostics
Indicators	Power On, Wiring Fault, LCD Display (Using Battery, AVR, Load Level, Battery Level)
Audible Alarms		On Battery, Low Battery, Overload
Environmental
Operating Temperature			32oF to 104oF ( 0oC to 40 oC )
Operating Relative Humidity			0 to 95% Non-Condensing
Operating Elevation			0-10000 feet (0-3000 meters)
Communication
PowerPanel ®Business Edition		Windows 98/ME/NT/2000/XP/Vista/7
Management
Self-Test			Manual Self-Test
Auto-Charger/ Auto-Restart			Yes
COM Interface		True RS232 x1+ Dry connector x1
Built-in USB Interface			Yes
SNMP/ HTTP Network Slot			Yes
Safety Approvals		UL1778,cUL107,FCC Part 15 Class A,CSA

of this Warranty, you should return the Product for a full refund prior to using it.

Who is Providing this Warranty?

CyberPower Systems (USA), Inc. ("CyberPower") provides this Limited Warranty.

What Does This Warranty Cover?

This warranty covers defects in materials and workmanship in the Product under normal use and conditions. It also covers equipment that was connected to the Product and damaged because of the failure of the Product.

What is the Period of Coverage?

This warranty covers the Product for three years and connected equipment for as long as you own the Product.

Who Is Covered?

This warranty only covers the original purchaser. Coverage ends if you sell or otherwise transfer the Product.

How Do You Get Service?

1.Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send us an e-mail message at claims@cpsww.com for instructions.

2.When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment. Have information on all applicable insurance or other resources of recovery/payment that are available to the Initial Customer and Request a Claim Number.

3.You must provide a dated Proof-of-Purchase receipt (or other proof of the original purchase) and provide a description of the defect.

4.Pack and ship the product with a dated Proof- of-Purchase receipt to CyberPower and, if requested, the item(s) of Connected Equipment, a repair cost estimate for the damage to the Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate.

How Long Do I Have To Make A Claim?

All claims must be made within ten days of the occurrence.

What Will We Do To Correct Problems? CyberPower will inspect and examine the Product.

If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required).

If it appears that our Product failed to protect any equipment plugged into it, we will also send you forms for making your claim for the connected equipment. We will repair or replace the equipment that was damaged because of the failure of our Product or pay you the fair market value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will use Orion Blue Book, or another a third-party valuation guide, or eBay, craigslist, or other source to establish that amount. Our maximum liability is limited to $400,000 for PR1000LCDRTXL2Ua /PR1500LCDRTXL2U/PR2200LCDRTXL2U.

Who Pays For Shipping?

We pay when we send items to you; you pay when you send items to us.

What Are Some Things This Warranty Does Not Cover?

1.This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software.

2.This Warranty does not cover or apply to: misuse, modification, operation or storage outside environmental limits of the Product or the equipment connected to it, nor for damage while in transit or in storage, nor if there has been improper operation or maintenance, or use with items not designed or intended for use with the Product, such as laser printers, appliances, aquariums, medical or life support devices, etc.

What Other Limitations Apply?

1.This Warranty does not apply unless the Product and the equipment that was connected to it were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.

2.The Product must have been plugged directly into the power source and the equipment connected to the Product must be directly connected to the Product and not "daisy-chained" together in serial fashion with any extension cords, another Product or device similar to the Product, surge suppressor, or power tap. Any such installation voids the Limited Warranty.

3.The Product and equipment connected to it must have been used properly in a suitable and proper environment and in conformance with any license, instruction manual, or warnings provided with the Product and the equipment connected to it.

4.The Product must have been used at all times within the limitations on the Product's VA capacity.

What are the Limitations?

The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.

The Product was designed to eliminate disrupting and damaging effects of momentary (less than 1ms) voltage spikes or impulses from lightning or other power transients. If it can be shown that a voltage spike lasting longer than 1ms has occurred, the occurrence will be deemed outside the rated capabilities of the Product and the Limited Warranty is void. CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:

1.Loss of or damage to data, records, or software or the restoration of data or records, or the reinstallation of software.

2.Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded and code-compliant 120 volt power lines in the United States and Canada; transients, surges or spikes on standard telephone land lines, PBX telephone equipment lines or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to fluctuations in data transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission.)

3.Damage from any circumstance described as excluded above with respect to the Product.

4.Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse, misuse or alteration of either the product or the Connected Equipment.

5.CyberPower excludes any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee. CyberPower excludes any liability for direct, indirect, special, incidental or consequential damages, whether for damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific limited agreement of CyberPower to provide certain warranty benefits regarding "Connected Equipment" under this Warranty], loss of profits, business interruption, or loss of information or data. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

6.The Product is not for use in high-risk activities or with aquariums. The Product is not designed or intended for use in hazardous environments requiring fail-safe performance, or for use in any circumstance in which the failure of the Product could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities or with aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or with Aquariums. ANY SUCH USE IS IMPROPER AND IS A MISUSE OF

THE PRODUCT.

What is the Fine Print?

The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. CyberPower is the warrantor under this Limited Warranty.

For further information please feel free to contact CyberPower at Cyber Power Systems (USA), Inc. 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.

Recycle Policy

CyberPower Systems encourages environmentally sound methods for disposal and recycling of its UPS products. Please dispose and/or recycle your UPS and batteries in accordance to the local regulations of your state.

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING!! This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Shielded signal cables must be used with this product to ensure compliance with the Class A FCC limits.

The Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de la class A respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada