Features, Specifications | CyberPower Systems CSB404 instruction

4-Outlet Surge Protector

CSB404

RESET	OFF	1
		1

User Manual

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSB404 Surge Protector. The information contained in this brochure explains the features and operation of the CSB404. Please take a few moments to read this manual.

FEATURES

1.ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A breaker. When an overload occurs, it will automatically switch off. To resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON

2.Four Standard Outlets

SPECIFICATIONS

•Model Number: CSB404

•Outlets: 4 Standard Outlets

•Surge Protection: 450 Joules

•Electrical Rating: 125V/15A/1875W

•UL Clamping Voltage: UL 1449 3rd/500V (H-N, H-G, N-G)

•Maximum Peak Current: 22,500A

•3 AC Lines Protected: H-N: 7,500A, H-G: 7,500A, N-G: 7,500A; (The maximum surge possible on household wiring is 6,000 volts)

•Response Time: Less than 1 nanosecond

•Attenuation: Up to 43dB

•Circuit Breaker: Resettable 15 Amp

•EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors. DO NOT plug into another relocat- able power tap. DO NOT “daisy chain” surge protectors.

DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load – now unprotected.

TROUBLESHOOTING

If the ON/OFF is switched off, the 15 AMP circuit breaker may have tripped. Examine your connected equipment and remove the device that is overloading the circuit. Then, the ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation, troubleshooting, or general product questions.

•Phone: 1-877-297-6937

•Email: tech@cpsww.com

•Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using the CyberPower CSB404 (the “CPS Product”). By using the CPS Product, you consent to be bound by the terms and conditions of this Limited Warranty and Connected Equipment Guarantee (together referred to as this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, what does it cover? CyberPower Systems (USA), Inc. (“CyberPower”) provides this Limited Warranty. It only covers the original purchaser and ends if you no longer own the CPS Product. This warranty covers defects in materials and workmanship in the CPS Product under normal use and conditions. It also covers equipment connected to the CPS Product and damaged because of the failure of the CPS Product. This warranty covers the CPS Product and connected equipment for as long as you own the CPS Product.

What must I do to make a warranty claim?

1.Call (877) 297-6937 or write to CyberPower, 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send a message at claims@cpsww.com for instructions.

2.Identify the Product, the Purchase Date, and the item(s) of Connected Equipment.

3.Provide a dated Proof-of-Purchase receipt (or other proof of the original purchase) and provide a description of the defect.

4.Pack and ship the product to CyberPower and, if requested, the item(s) of Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate.

5.Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems? CyberPower will inspect and examine the CPS Product. If the CPS Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower’s expense, or CyberPower will refund the full purchase price you paid for the CPS Product (purchase receipt showing price paid is required).

If the CPS Product failed to protect any equipment plugged into it, we will also send you forms for making your claim for the connected equipment. We will repair or replace the equipment

that was damaged because of the failure of the CPS Product or pay you the fair market value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will use Orion Blue Book, another a third-party valuation guide, eBay, craigslist, or other source to establish that amount. Our maximum liability is limited to $25,000 for the CSB404.

Who pays for shipping?

We pay when we send items to you; you pay when you send items to us.

What are some things this Warranty does not cover?

1.THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE OR THE RESTORATION OF DATA OR RECORDS, OR THE REINSTAL- LATION OF SOFTWARE.

2.This Warranty does not cover: misuse, modification, operation or storage outside environmental limits of the CPS Product or the equipment connected to it, or for damage while in transit or in storage, nor if there has been improper operation or maintenance, or use with items not designed or intended for use with the CPS Product, such as laser printers, appliances, aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.

1.This Warranty does not apply unless the CPS Product and the connected equipment were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.

2.The CPS Product must have been plugged directly into the power source and the equipment connected to the CPS Product must be directly connected in the CPS Product, not “daisy-chained” together in serial fashion with any extension cords, another Product or device similar to the CPS Product, surge suppressor, or power tap. Any such installation voids the Warranty.

3.The CPS Product and connected equipment must have been used properly in a suitable and proper environment, in conformance with any applicable license, instruction manual, or warnings.

4.The CPS Product must have been used at all times within the limitations on the CPS Product’s VA capacity.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited Warranty, and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements.

Registration is quick and easy at www.cpsww.com/register.

CONTACT INFORMATION

CyberPower Systems, Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379 Toll-free: 1-877-297-6937 CPSww.com

Please join CyberPower in caring for the environment by recycling this manual.

This devise is manufactured using environmentally-safe procedures in compliance with the Restriction on Hazardous Substances (RoHS) directive.

K09-0000110-01

CSB404 specifications

CyberPower Systems CSB404 is an advanced power management device designed to meet the growing demands of modern technology environments. This essential piece of equipment is particularly valued in data centers, telecommunications, and industrial applications. The CSB404 integrates superior technologies to ensure that devices remain powered and protected.

One of the standout features of the CSB404 is its impressive battery capacity. With a built-in 4Ah battery, this model offers extended runtime during power outages, ensuring that critical equipment remains operational. This is crucial for businesses that rely on uptime as even a brief interruption can lead to significant losses. Its intelligent battery management system optimizes charging times and extends battery life, providing reliability over the long term.

The CSB404 is also equipped with cutting-edge surge protection technology. This feature safeguards connected devices from voltage spikes and surges caused by lightning strikes or power fluctuations, ensuring that sensitive equipment remains unharmed. The device conforms to stringent safety standards, making it a trustworthy choice for those who prioritize device protection.

In terms of connectivity, the CSB404 offers a variety of interfaces. It features multiple output sockets, allowing users to connect various devices effortlessly. This versatility makes it suitable for a range of applications, from home offices to large-scale industrial setups. Additionally, the built-in LCD display provides real-time monitoring of system performance, battery status, and load capacity, enabling users to make informed decisions regarding power management.

Another significant characteristic of the CSB404 is its compact and ergonomic design. Its lightweight chassis allows for easy installation and placement, whether in a server rack or a more confined environment. This design consideration is vital in today’s technology landscape, where space is often at a premium.

The CSB404 also includes advanced technologies such as eco-friendly energy efficiency features, reducing overall power consumption without compromising performance. With users increasingly conscious of environmental impacts, this aspect adds to its appeal, aligning with sustainable practices in technology use.

In conclusion, the CyberPower Systems CSB404 stands out as a reliable, efficient, and protective power management solution. Its robust features, including extended battery life, surge protection, versatile connectivity, and energy efficiency, make it an ideal choice for a wide range of applications. Whether for personal use or large-scale operations, the CSB404 ensures users can rely on consistent power delivery.

CyberPower Systems CSB404 specifications Congratulations on Your Purchase, Features

Models: CSB404