Cypress CDL-160ETH operation manual ③ ④ ⑤

7.3 Rear Panel

DC 5V HDMI OUT POWER

EDID

OFF ON LINK

① ② ③ ④ ⑤

①Power: This slot is where user plugs the 5V DC power supply of the unit before connecting the adaptor to an AC wall outlet.

②HDMI OUT: The display output port of the converter that is only compatible with HDMI display.

③EDID control switch: The default setting of this switch is “ON”.

Leave as it is if the display is properly. If the display has built-in native EDID, the screen will show display’s resolution and user can selected from SCREEN RESOLUTION. When switched OFF, the screen will show internal EDID and user can select from SCREEN RESOLUTION .

Note:

When switch from ON to OFF position, user needs to go to “Launch USB

Server ” to disconnect DisplayLink USB to HDMI and reconnect it again. If not, the system will remain ON . However, from OFF to ON, the

user does not need to reconnect the DisplayLink USB to HDMI device,

the system will automatically switch to ON mode.(See section 9 for details)

④LINK LED Indicator: When input switch to MINI USB the blue LED will illuminate when the source signal is connected. When input switch to Ethernet a blinking blue LED means its doing signal connection.

⑤Power LED Indicator: Red LED will illuminate when power is connected to the converter.

5