D-Link technical specifications Hub to DES-1005D, DES-1005Dto switch, Additional Information

The LED indicators for PC connection depend on the LAN card’s capabilities. If LED indicators are not lit after making a proper connection, check the PC LAN card, the cable and the DES-1005D conditions and connections.

1.The “100LINK/ACT,10LINK/ACT” LED indicator lights green for hookup to 100Mbps speed or light amber for hookup to 10Mbps speed.

Hub to DES-1005D

A hub (10 or 100BASE-TX) can be connected to the DES-1005D via a two-pair Category 3, 4, 5 UTP/STP straight cables. For 100Mbps operation a Category 5 cable must be used. The connection is accomplished from any port of the hub to any port of the switch.

DES-1005D to switch

The DES-1005D can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable. A Category 5 cable must be used for 100Mbps operation. The connection can be done from any (MDI-X) port of the Switch (Switch A) to any of the 10Mbps, 100Mbps (MDI- X) port of the other switch (switch B) or other devices.

Additional Information

If you are encountering problems setting up your network, please refer to the User’s Guide that came with the switch. It contains many more rules, charts, explanations and examples to help you get your network up and running.

Additional help is available online at http://www.dlink.com in the United States, at http://www.dlink.co.uk in the United Kingdom, or through our offices listed at the back of the User’s Guide.

4