D-Link DES-2218 manual Setting up the Switch, TCP/IP Settings

DES-2218 Ethernet Switch User’s Guide

Figure 6-9. Deleting a User

4.Choose SAVE and press Enter to let the user addition take effect.

5.Choose EXIT to leave the Delete Users menu.

Setting up the Switch

This section describes the settings you will need to change to allow you to be able to manage the switch from an SNMP-based Network Management System such as D-Link’s D-View, or to be able to access the switch using the Telnet protocol.

TCP/IP Settings

The switch needs to have a TCP/IP address assigned to it so that the network management system or Telnet client can find it on the network. The TCP/IP Parameters Configuration Menu allows you to change the settings for the two different interfaces used on the switch: the Ethernet interface used for in-band communication, and the SLIP interface used over the console port for out-of-band communication.

Using the Console Interface 31