D-Link DGS-1016, DGS-1024 manual Attaching the Rubber Feet, Provide for Adequate Ventilation

D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch

A.Attach the ears to each side of the Switch, using the screw-holes located on the side of the device.

B.Firmly attach the ears to the rack as shown. Please follow the usual safety precautions for rack-mountable products

Attaching the Rubber Feet

Use rubber feet provided. Position and apply rubber feet to the underside of the DGS-1016D/1024D Switch.

Figure 2-2. Attaching the Rubber Feet

Provide for Adequate Ventilation

CAUTION: Do not place any device on top of Switch, or place the Switch on top of any device or object that will block the free flow of air through the ventilation slots on the sides, top, and bottom of the Switch’s case. In addition, care should be taken not to locate the Switch next to, on top of, or underneath any device that generates a significant amount of heat. For the Switch to perform at its optimal level, the Switch must have adequate ventilation to prevent the Switch from overheating and becoming damaged.

10